2013 Lincoln MKS Owner Manual Printing 2 - Page 143

Universal Garage Door Opener 143 2. Return to your car. 3. Press and hold the function button you want to program for 2 seconds, then release. Repeat this step. Depending on the brand of garage door opener you may need to repeat this sequence a third time. To program additional buttons repeat steps one through four. For questions or comments, please contact HomeLink௡ at www.homelink.com or 1-800-355-3515. Erasing the Function Button Codes Note: You can not erase individual buttons. 1. Press and hold the outer two function buttons simultaneously for approximately 20 seconds until the indicator lights above the buttons flash rapidly. 2. When the indicator lights flash, release the buttons. The codes for all buttons are erased. Reprogramming a single button To program a device to a previously trained button, follow these steps: 1. Press and hold the desired button. Do NOT release the button. 2. The indicator light will begin to flash after 20 seconds. Without releasing the button, follow Step 1 in the Programming section. For questions or comments, contact HomeLink௡ at www.homelink.com or 1-800-355-3515. Programming HomeLinkா to a Genie Intellicodeா 2 garage door opener Note: The Genie Intellicode௡ 2 transmitter must already be programmed to operate with the garage door opener. 2013 MKS (mks) Owners Guide gf, 2nd Printing USA (fus)