2008 Mazda CX-9 Owner's Manual - Page 118
2008 Mazda CX-9 Manual
Page 118 highlights
Knowing Your Mazda Doors and Locks Manual opening/closing To open a power window to the desired position, lightly hold down the switch. To close the power window to the desired position, lightly pull up the switch. Owner master control switch NOTE (POWER WINDOW INITIALIZATION PROCEDURE) If the battery was disconnected during vehicle maintenance, or for other reasons such as a switch continues to be operated after the window is fully open/close, the power windows will not fully open and close automatically. Reinitialization of the automatic function can be performed using the master control switches and the front passenger door switch. Carry out the following procedure to resume operation: 1. Turn the ignition switch to the ON position. 2. Make sure that the power window lock switch located on the driver's door is not depressed. 3. Press the switch and fully open the power window. 4. Pull up the switch to fully close the power window and continue holding the switch for about 2 seconds after the window fully closed. 5. Repeat Steps 3-4 for each front power window. 6. Make sure that the power windows operate correctly using the door switches. Close Driver's window Open Front passenger's window Front passenger switch Close Open Auto-opening/closing To fully open a power window automatically, press the switch completely down. To fully close the power window automatically, pull the switch completely up. To stop the power window partway, pull or press the switch in the opposite direction and then release it. Two-step down function With the power window completely closed, press the switch lightly and it will open and stop about 3 cm (1 in) from the top. If you continue to press and hold the switch, the window will resume opening all the way. NOTE Pressing the power window switch once when the window is fully closed will only open it about 3 cm (1 in) to allow convenient ventilation of the cabin. 3-36