2008 Mazda CX-9 Owner's Manual - Page 20

Essential Safety Equipment Seats NOTE l l Seat positions can also be called up with the ignition switch in the ON position or the door closed by pressing and holding the programming button ― that has been programmed to the desired seat position. If any of the following occurs, the seat position call up function cancels: A seat adjustment switch is operated. The vehicle is moving or starts to move. The selected programming button ― or the set button is pressed again. l l l Programming One seat position can be programmed into each advanced key/retractable type key. After the following conditions have been met, operate the seat and the advanced key/retractable type key to program the seat positions. l The ignition switch is in the LOCK position (The auxiliary key/retractable type key is removed from the ignition switch) l The driver's door is open 1. Adjust the seat to the desired position. For each seat position adjustment method, refer to the following pages: Seat Slide (page 2-5) Seat Recline (page 2-6) Height Adjustment (page 2-6) 2. Press and hold the unlock button of the advanced key/retractable type key while pressing the set button until a beep sound is heard. Seat position call up With the ignition switch in the LOCK position and the shift lever in park (P), unlock the doors using the unlock button on the advanced key/retractable type key, and open the driver's door within about 30 seconds. Erasing memory After the following conditions have been met, press the lock button of the advanced key/retractable type key while pressing the set button until a beep sound is heard. l The ignition switch is in the LOCK position (The auxiliary key/retractable type key is removed from the ignition switch) l The driver's door is open Operation using the advanced key/ retractable type key With advanced key Lock button Auxiliary key Unlock button With retractable type key Lock button Unlock button 2-8