2002 Mercury Sable Owner Guide 4th Printing - Page 86

Locks and Security 1. Turn the ignition key to RUN, then press the power door UNLOCK control button 3 times. 2. Turn the ignition key to OFF, then press the power door UNLOCK control button 3 times. 3. Turn the ignition key to RUN, within five seconds press the power door UNLOCK control button 2 times. The user should receive two horn chirps to indicate the system had been altered. Note: Puddle lamps cannot be deactivated, only the head, park, and tail lamps will be deactivated/activated. • Turn ignition to OFF to exit. KEYLESS ENTRY SYSTEM (IF EQUIPPED) With the keyless entry keypad, you can: 1 2 3 4 • lock or unlock the vehicle doors and liftgate (wagons) without using the key. • open the trunk. • arm and disarm the perimeter alarm system (if equipped). See also Remote entry system and Perimeter alarm system in this chapter for more information. Your vehicle has a factory-set 5-digit code that operates the keyless entry system. You can also program your own 5-digit personal entry code. The factory-set code is located: • On the owner's wallet card in the glove compartment, • On the inner side of the passenger compartment fuse box, or • At your dealer. When using the keyless entry keypad, press the middle of each button in order to ensure a good activation. 5 6 7 8 9 0 86