2005 Mercury Monterey Owner Guide 2nd Printing - Page 162

Seating and Safety Restraints 8. Allow the safety belt to retract to remove any slack in the belt. 9. Before placing the child in the seat, forcibly move the seat forward and back to make sure the seat is securely held in place. To check this, grab the seat at the belt path and attempt to move it side to side and forward. There should be no more than one inch of movement for proper installation. 10. Try to pull the belt out of the retractor to make sure the retractor is in the automatic locking mode (you should not be able to pull more belt out). If the retractor is not locked, unbuckle the belt and repeat Steps two through nine. Check to make sure the child seat is properly secured before each use. Attaching child safety seats with tether straps New forward-facing child safety seats include a tether strap which goes over the back of the seat and hooks to an anchoring point. Tether straps are available as an accessory for many older safety seats. Contact the manufacturer of your child seat for information about ordering a tether strap. Children should be placed in the rear in an appropriate child safety seat that is properly secured to the vehicle. The tether anchors in your vehicle are in the positions shown: The front passenger seat with power adjustment does not have a tether anchor. 162 2005 Monterey (mty) Owners Guide (post-2002-fmt) USA_English (fus)