2005 Mercury Monterey Owner Guide 2nd Printing - Page 60

Driver Controls To power open or close the PSD from the Overhead console: Push and release the overhead console right or left hand control. Pressing this control will also simultaneously unlock all doors. To power open or close the PSD from the second row passenger control switch: • Ensure that the PSD is unlocked, using the key fob or power door unlock. Refer to Remote Entry System in the Locks and security chapter. • Push and release the right or left hand second row passenger control. The control(s) are located on the trim panel in front of the sliding door. To power open the PSD with the inside or outside release handle: • Ensure that the PSD is unlocked, using the key fob or power door unlock. Refer to Remote Entry System in the Locks and security chapter. • Manually pull the inside or outside sliding door handle to engage the power assist feature. Release the handle as soon as the PSD begins to power open. To power close the PSD with the inside or outside release handle: • Manually pull the door about 6 inches in the desired direction of travel. The power door assist will take over and complete the open or close operation. Pressing any of the switches, overhead console, second row passenger, or remote transmitter while the door is moving will cause the door to either reverse direction or stop depending on the position and direction of movement of the door. To power open or close the PSD with the Key fob: Refer to the Remote entry system section in this chapter. Operating the transmitter will also simultaneously unlock the doors. 60 2005 Monterey (mty) Owners Guide (post-2002-fmt) USA_English (fus)