2005 Mercury Sable Owner's Manual - Page 73
2005 Mercury Sable Manual
Page 73 highlights
Locks and Security 1. Turn the ignition to the 4 (ON) 3 position, then press the power door 2 UNLOCK control 3 times. 2. Turn the ignition to the 3 (OFF) 4 position, then press the power door 1 UNLOCK control 3 times. 5 3. Turn the ignition to the 4 (ON) position. The horn will chirp one time as confirmation that the programming mode is staged. 4. Within 5 seconds, press the power door UNLOCK control and then press the power door LOCK control. Note: The horn will chirp once if autolock was deactivated or chirp once then honk (one short and one long chirp) if autolock was activated. 5. Turn the ignition to the 3 (OFF) position. The horn will chirp once to confirm the procedure is complete. Smart unlocking feature The smart unlocking feature helps prevent you from locking yourself out of the vehicle. With the key in any ignition position, the driver's door will automatically unlock if it is locked using the power lock control on the driver's door panel while the driver's door is open. Childproof door locks • When these locks are set, the rear doors cannot be opened from the inside. • The rear doors can be opened from the outside when the doors are unlocked. The childproof locks are located on rear edge of each rear door and must be set separately for each door. Setting the lock for one door will not automatically set the lock for both doors. • Move lock control up to engage the childproof lock. • Move control down to disengage childproof locks. 73 REVIEW COPY 2005 Sable (sab), Owners Guide (post-2002-fmt) (own2002), Market: USA_English (fus)