1996 Nissan Maxima Owner's Manual - Page 96

pressing the accelerator pedal. The foot brakes should be used for this purpose. Shifting from "P" (Park) If the ignition switch is in the "ON" position and the foot brake pedal is depressed, but the shift lever still cannot be moved out of "P" (Park), follow these instructions: 1. Shut the engine off and remove the key. 2. Apply the parking brake. 3. Reinsert the ignition key and turn it clockwise to the "ACC" position. 4. Depress the brake pedal, move the gearshift lever to "N" (Neutral) and start the engine. 5. Check stop light operation. SD1003M Push the button to shift into "P", "R" or from "D" to "2". All other positions can be selected without pushing the button. "P" (Park): Use this selector position when the vehicle is parked or when starting the engine. Always be sure the vehicle is at a complete stop. For maximum safety, depress the brake pedal, then push in the select lever button and move the lever to the "P" position. Apply the parking brake. When parking on a hill, apply the parking brake first, then shift the lever into the "P" position. If the shift lever cannot be moved from the "P" position while the engine is running and the brake pedal depressed, the stop lights may not work. Malfunctioning stop lights could cause an accident injuring yourself and others. These instructions for starting the vehicle in "N" (Neutral) should only be used until service can be obtained. Never drive the vehicle if the 4-7