2000 Nissan Frontier Owner's Manual - Page 137
2000 Nissan Frontier Manual
Page 137 highlights
2) Turn the ignition key slightly in the ON direction. 3) Turn the key toward the LOCK position. 4) Remove the key. The shift lever is designed so it cannot be moved out of P (Park) and into any of the other gear positions if the ignition key is turned to OFF or if the key is removed from the switch. The shift lever can be moved if the ignition switch is in the ACC position. This allows the vehicle to be moved if the battery is discharged. The shift lever can also be moved if the ignition switch is in the ON position and the foot brake pedal is depressed. There is an OFF position between the LOCK and ACC positions. The OFF position is indicated by a ″1″ on the key cylinder. When the ignition is in the OFF position, the steering wheel is not locked. To lock the steering wheel, turn the key to the LOCK position. Remove the key. In order for the steering wheel to be locked, it must be turned about 1/8 of a turn clockwise from the straight up position. To unlock the steering wheel, insert the key and turn it gently while rotating the steering wheel slightly right and left. WARNING Never remove or turn the key to the LOCK position while driving. The steering wheel will lock. This may cause the driver tolose control of the vehicle and could result in serious vehicle damage or personal injury. Key positions LOCK Normal parking position (0) OFF (Manual transmission model) (1) The engine can be turned off without locking the steering wheel. ACC (Accessories) (2) This position activates electrical accessories such as the radio when the engine is not running. The shifter can be moved if the ignition switch is in ACC position. ON (Normal operating position) (3) This position turns on the ignition system and electrical accessories. ASD1014 AUTOMATIC TRANSMISSION On automatic transmission models, the ignition lock is designed so the key cannot be turned to LOCK and removed until the shift selector lever is moved to the P (Park) position. When removing the key from the ignition, make sure the shift selector lever is in the P (Park) position. If the key cannot be turned to the LOCK position, proceed as follows to remove the key: 1) Move the shift selector lever into the P (Park) position. Starting and driving 5-7