2001 Nissan Sentra Owner's Manual - Page 101

Radio/Cassette tape priority mode In this mode, the radio station illuminates in the display during radio operation. During cassette tape operation, TAPE illuminates in the display. SEEK/SCAN tuning SEEK tuning Push the tuning button for less than 1.5 seconds. SEEK tuning begins from low to high frequencies and stops at the next broadcasting station. Pushing the button again continues the SEEK function. Once the highest broadcasting station is reached, the radio continues in the SEEK mode at the lowest broadcast station. SCAN tuning Push the tuning button for more than 1.5 seconds. SCAN illuminates in the display. SCAN tuning begins from low to high frequencies and stops at each broadcasting station for five seconds. Pushing the button again during this five-second period stops SCAN tuning and the radio remains tuned to that station. AHA1045 FM-AM radio operation FM-AM band select Push the band select button to change from AM to FM reception. The FM stereo indicator, ST, illuminates during FM stereo reception. When the stereo broadcast signal is weak, the radio automatically changes from stereo to monaural reception. TUNE buttons WARNING The radio should not be tuned while driving so full attention may be given to vehicle operation. Use the and buttons for manual tuning. To move quickly through the channels, hold either of the tune buttons down for more than 0.5 seconds. Station memory operations Six stations can be set for the AM band. Twelve stations can be set for the FM band (six for FM1, six for FM2). 1. Push the band select button to select 4-12 Heater, air conditioner and audio systems