2001 Nissan Sentra Owner's Manual - Page 102

AM, FM1, or FM2. The selected band illuminates in the display. 2. Tune to the desired station. 3. Push the desired station select button for more than 1.5 seconds. For example, in the illustrations, ch2 is to be memorized. The radio mutes when the select button is pushed. 4. When the sound resumes, memorizing is complete. 5. Other station select buttons can be set in the same manner. If the battery cable is disconnected, or if the radio fuse opens, the radio memory is cancelled. In that case, reset the desired stations. cally turns off and the cassette tape begins to play. CAUTION Do not force the cassette tape into the tape door. This could cause player damage. The cassette tape automatically changes directions to play the other side when the first side is complete. At this time, the moving digital squares illuminate on the left side of the display window. Precautions on cassette player operation ● To maintain good quality sound, NISSAN recommends using cassette tapes of 60 minutes or shorter in length. ● Cassette tapes should be removed from the player when not in use. Store cassettes in their protective cases and away from direct sunlight, heat, dust, moisture and magnetic sources. ● Direct sunlight can cause the cassette to become deformed. The use of deformed cassettes may cause the cassette to jam in the player. ● Do not use cassettes with labels which are peeling and loose. If used, the label could jam in the player. ● If a cassette has loose tape, insert a pencil through one of the cassette hubs and rewind the tape firmly around the hubs. Loose tape may cause tape jamming and wavering sound quality. ● Over a period of time, the playback head, capstan and pinch roller may collect a tape coating residue as the tape is played. This residue accumulation can cause weak or wavering sound, and should be removed periodically with a head cleaning tape. If the residue is not removed periodically, the player may need to be disassembled for cleaning. PLAY/STOP button while the cassette Push the tape is playing to stop the tape. Push the button again to play the tape. Cassette tape player operation Turn the ignition key to ACC or ON, and carefully insert a cassette tape into the tape door. The cassette tape automatically pulls into the player. The word TAPE and moving digital squares illuminate on the right side of the display window. If the radio is already operating it automati- Changing the direction of tape play Push the (program) select button. The moving digital squares illuminate on either the right or left side of the display Heater, air conditioner and audio systems 4-13