2013 Nissan Murano Quick Reference Guide - Page 13

To slide the front passenger's seat back into position, push the bottom half of the seatback 05 until it locks. Next, adjust the seatback by pulling the seatback lever 06 up. Release the lever to lock the seatback into position. For more information, refer to the "Safety - Seats, seat belts and supplemental restraint system (section 1)" of your Owner's Manual. 05 06 AUTOMATIC DRIVE POSITIONER (if so equipped) Two positions for the driver's seat, steering column and outside mirrors can be stored in the automatic drive positioner memory. Follow these procedures to set the memory positions: • Confirm the shift lever is in the P (PARK) position. • Push the ignition switch to the ON position. • Adjust the driver's seat, steering column and outside mirrors to the desired positions using the adjusting switches for each feature. • Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at least 1 second. • The indicator light on the memory switch you select will illuminate for approximately 5 seconds. • The driver's seat, steering column and outside mirror positions are now set to your preference. These memorized positions can also be linked to your NISSAN Intelligent Key®. For more information, refer to the "Pre-driving checks and adjustments (section 3)" of your Owner's Manual. OUTSIDE MIRROR CONTROL SWITCH To select the right or left side mirror, turn the control switch 01 right or left. To adjust the mirror angle, move the control switch up, down, right or left. To prevent accidentally moving the mirror, turn and set the switch to the middle "neutral" position. For more information, refer to the "Pre-driving checks and adjustments (section 3)" of your Owner's Manual. 01 To view detailed instructional videos regarding these and other features, please go to www.nissanownersinfo.mobi. 11