2014 Nissan Pathfinder Owner's Manual - Page 427

VARIABLE VOLTAGE CONTROL SYSTEM (if so equipped) The current sensor is located near the battery along the negative battery cable. If you add electrical accessories to your vehicle, be sure to ground them to a suitable body ground such as the frame or engine block area. DRIVE BELT LDI2132 LDI2099 CAUTION ● Do not ground accessories directly to the battery terminal. Doing so will bypass the variable voltage control system and the vehicle battery may not charge completely. ● Use electrical accessories with the engine running to avoid discharging the vehicle battery. Your vehicle is equipped with a variable voltage control system. This system measures the amount of electrical discharge from the battery and controls voltage generated by the generator. 1. 2. 3. 4 Drive belt automatic tensioner Generator A/C compressor Crankshaft pulley WARNING Be sure the ignition key is in the OFF or LOCK position before servicing drive belt. The engine could rotate unexpectedly. 1. Visually inspect the belt for signs of unusual wear, cuts, fraying or looseness. If the belt is in poor condition or is loose, have it replaced or adjusted by a NISSAN dealer. 8-16 Maintenance and do-it-yourself