2014 Nissan Pathfinder Dismantling Guide - Page 31

12. Remove traction motor inverter cover (1). 1 AAYIA0273ZZ 13. Disconnect negative (-) battery cable and cover it with insulated tape. AAYIA0274ZZ 14. Perform the dismantling operation. Refer to Dismantling Information (DG-41). 3-4.2 Cutting the Vehicle Body • • • Do not cut into high voltage related areas to avoid severe personal injury or death. Do not cut into the Li-ion battery to avoid severe personal injury or death. When removing parts, NEVER touch the high voltage parts or the insides of the exposed orange-colored high voltage cables to avoid severe personal injury or death. Personal Protective Equipment (PPE) must always be worn when touching or working on high voltage components. • To avoid unintended reinstallation and risk of electrical shock and severe personal injury or death, the dismantler should carry the fuses or service plug on his/her person while work is in progress. Do not cut air bag parts to avoid unintended deployment of the air bags and the risk of severe personal injury or death. If approximately (10) minutes have passed since the rescuer shut down the high voltage system [refer to 3-4.1 High Voltage System Shut-Down Procedure (DG-21)], then the dismantler can cut the vehicle except for the Li-ion battery. DG-31