2000 Pontiac Bonneville Owner's Manual - Page 16

Memory Seat and Mirrors (Option) The controls for the memory seat and mirrors are located on the driver's door panel, and are used to program and recall previous settings that have been stored. When your vehicle is in PARK (P) and a memory button is pressed, a single beep will sound through the audio system and the memory position will be recalled. You can also store an exit position for each driver. The exit position will be set for the most recently selected driver position (1 or 2). The exit position is programmed by moving to the desired exit position and then holding the exit button for five seconds. The exit position will be recalled when the exit button is pressed and will correspond to the driving position that was recalled last. Note that selecting a new position with the memory button will change all of the other personalization features that you have programmed also. See "Personalization Programming" in the Index for more information. Memory seat and exit recall will only work when the automatic transaxle is in PARK (P). Adjust the driver's seat (including the lumbar adjustments) and both the outside mirrors to the position for driving. Then press and hold button 1 for five seconds. A double beep will sound when the memory is set. To set the seat and mirror positions for a second driver, follow the previous steps, but press button 2 instead. 1-4