2003 Subaru Legacy Owner's Manual - Page 267
2003 Subaru Legacy Manual
Page 267 highlights
Starting and operating To shift the selector lever from the "P" to the any other position, you have to depress the brake pedal fully when the ignition switch is in the "ON" position. This prevents the vehicle from lurching when it is started. If the shift lever does not move from the "P" position with the brake pedal depressed, refer to the "Shift lock release" section in this chapter. B R (Reverse) This position is for backing the vehicle. To shift from the "N" to "R" position, first stop the vehicle completely then move the lever to the "R" position. B N (Neutral) WARNING Do not drive the vehicle with the selector lever in the "N" (neutral) position. Engine braking has no effect in this condition and the risk of an accident is consequently increased. This position is for restarting a stalled engine. In this position the wheels and transmission are not locked. In this position, the transmission is neutral; the vehicle will roll freely, even on the slightest incline unless the parking brake or foot brake is on. Avoid coasting with the transmission neutral. During coasting, the engine braking does not act. B D (Drive) This position is for normal driving. The transmission automatically shifts into a suitable gear from 1st to 4th according to the vehicle speed and the acceleration you require. When more acceleration is required in this position, press the accelerator pedal fully to the floor and hold that position. The transmission will automatically downshift to 3rd, 2nd or 1st gear. When you release the pedal, the transmission will return to the original gear position. - CONTINUED - 7 7-17