2004 Subaru Impreza Owner's Manual - Page 144

Instruments and controls Meters and gauges (WRX-STi) ! Combination meter illumination When the ignition switch is turned to the "ON" position, the various parts of the combination meter are illuminated in the following sequence: 1. Meter needles and gauge needles light up. 2. Meter needles and gauge needles each show MAX position. 3. Meter needles and gauge needles each show MIN position, and REV indicator flashes. 4. Dials and indicators in meters and gauges light up. 5. "STi" mark lights up. 6. Regular illumination (for driving) begins. - - : sequential illumination cancelled The setting toggles between "ON" and each time the trip knob is pressed. Return the REV setting knob to its original position to complete the setting process. The buzzer will sound briefly. A few seconds later, the ambient temperature gauge will return to showing the ambient temperature. NOTE It is not possible to cancel sequential illumination of the combination meter while sequential illumination is actually taking place. Cancel sequential illumination when regular illumination (for driving) has begun. ! Cancelling sequential illumination of the combination meter With the ignition switch in the "ON" position, it is possible to cancel sequential illumination of the combination meter. Press the trip knob while turning the REV setting knob clockwise or counterclockwise. The buzzer will sound briefly, and the ambient temperature gauge will show "ON" or ON : sequential illumination ! Speedometer The speedometer shows the vehicle speed. - CONTINUED - 3-7