2006 Subaru B9 Tribeca Owner's Manual - Page 60

1-36 Seat, seatbelt and SRS airbags top tether, latch the hook onto the top tether anchor and tighten the top tether. See the "Top tether anchorages" for additional instructions. 100509 100510 8. Before having a child sit in the child restraint system, move it back and forth and right and left to check if it is firmly secured. Sometimes a child restraint can be more firmly secured by pushing it down into the seat cushion and then tightening the seatbelt. 9. Pull at the shoulder portion of the belt to confirm that it cannot be pulled out (ALR properly functioning). Rear seat (5-seater models)/Second-row seat (7-seater models) 100512 11.To remove the child restraint system, press the release button on the seatbelt buckle and allow the belt to retract completely. The belt will return to the ELR mode. NOTE When the child restraint system is no longer in use, remove it and restore the ELR function of the retractor. That function is restored by allowing the seatbelt to retract fully. 100511 Third-row seat (7-seater models) 10.If the child restraint system requires a