2009 Subaru Impreza Owner's Manual - Page 368

Maintenance and service 11-53 ! 5-door models vehicle. 1. Using a Phillips screwdriver, remove the upper and lower screws that secure the rear combination light assembly. 1) 2) Rear side marker light Rear turn signal light 6. Put the rear combination light assembly into place while aligning the clip with the guide on the vehicle. 3. Remove the bulb socket from the rear combination light assembly by turning it counterclockwise. 4. Pull the bulb out of the bulb socket and replace it with a new one. 5. Set the bulb socket into the rear combination light assembly and turn it clockwise until it locks. 7. Tighten the upper and lower screws. 2. Slide the rear combination light assembly rearward and remove it from the - CONTINUED -