2007 Suzuki Forenza Owner's Manual - Page 185

SERVICE AND APPEARANCE CARE 4) Remove the compact spare tire. See "Compact Spare Tire" in this section for more information. 5) Remove the jack, jack handle and the wheel wrench. The jack is located in the cargo area. Turn the jack retainer, located on the right side of the jack, counterclockwise to release it. The jack handle and the wheel wrench are located inside the foam tray. In case of the Wagon models, do the following: 3) Near each wheel well is a notch in the frame which the jack head fits in. Position the jack and raise the jack head until it fits firmly into the notch in the vehicle's frame nearest the flat tire. Put the compact spare tire near you. 5) Remove the compact spare tire. See "Compact Spare Tire" in this section for more information. N5U5006A 6) To access the tools, pull the strap on the tool box cover upward. The tools are located inside the foam tray. Removing the Flat Tire and Installing the Spare Tire 1) If your vehicle is equipped with wheel covers, loosen the 4 plastic caps by hand with the aid of the wheel wrench and remove the wheel cover. 2) Then use the wheel wrench to loosen all the wheel nuts. Don't remove them yet. WARNING Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. N5U5005A 1) Open the floor cover by pulling the handle upward. 2) Lift the floor tray. 3) Release the prop from its retainer and put the prop into the slot. 4) Turn the retainer on the compact spare tire counterclockwise and remove the retainer. 5-41