2007 Suzuki Grand Vitara Owner's Manual - Page 47

BEFORE DRIVING EXAMPLE If your LATCH restraint has rigid lower connecting bars, these general instructions apply: 1) If possible, fold the seatback rearward for easier installation. 2) Place the child restraint in the rear seat, inserting the connecting bars through the slots in the seat cushion or the slots in the seatback bottom. EXAMPLE EXAMPLE 65D342 54G184 5) Make sure the child restraint is securely fastened by trying to move the child restraint system in all directions, especially forward. 4) Push the child restraint toward the anchors so that the connecting bar tips are partially hooked to the anchors. Use your hands to confirm the position. WARNING The seatback should always be securely latched in a fairly upright position when any type of child seat is installed. An unlatched or reclined seatback will reduce the intended effectiveness of the child restraint system. 54G183 3) Use your hands to carefully align the connecting bar tips with the anchors. Take care not to pinch your fingers. 2-33