2013 Toyota Sequoia Navigation Manual
2013 Toyota Sequoia Manual
2013 Toyota Sequoia manual content summary:
- 2013 Toyota Sequoia | Navigation Manual - Page 1
approaching an intersection. These voice instructions will help you keep your eyes on the road and are timed to provide enough time to allow you to maneuver, change lanes or slow down. Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability - 2013 Toyota Sequoia | Navigation Manual - Page 2
OPERATION IMPORTANT INFORMATION ABOUT THIS MANUAL For safety reasons, this manual indicates items requiring particular attention avoid or reduce the risk of damage to your vehicle and its equipment. SYMBOLS USED IN ILLUSTRATIONS Safety symbol The symbol of a circle with a slash through it means - 2013 Toyota Sequoia | Navigation Manual - Page 3
OPERATION HOW TO READ THIS MANUAL No. Name Operational Outlines Main Operations Related Operations Information Description An outline of the operation is explained. The steps of an operation are explained. A main operation's supplementary operations are described. Useful information for the user - 2013 Toyota Sequoia | Navigation Manual - Page 4
as the safety of an area, condition of streets, and availability of emergency services. If unsure about the safety of an area, do not drive into it. Under no circumstances is this system a substitute for the driver's personal judgement. Use this system only in locations where it is legal to do - 2013 Toyota Sequoia | Navigation Manual - Page 5
set to north-up or heading-up. Touching this symbol changes the map orientation. Both north-up and heading-up symbols display scale. Press to display the "Information" screen. For vehicles sold in Canada, the "INFO" button is used instead of the "INFO/APPS" button. Page 39 Scale indicator 38 24 - 2013 Toyota Sequoia | Navigation Manual - Page 6
1. NAVIGATION OPERATION No. Name "Route" Function Touch to change the route. Touch to browse information about guidance route, to set the POI (Point of Interest) icons to be displayed on the screen, or to - 2013 Toyota Sequoia | Navigation Manual - Page 7
1. NAVIGATION OPERATION 2. REGISTERING HOME 1 Press the "DEST" button. 4 There are 4 different methods to search your home. (See "DESTINATION SEARCH" on page 52.) 2 Touch "Go Home". 5 Touch "Enter". If a home address has not been registered, it can be registered by touching "Go Home". The " - 2013 Toyota Sequoia | Navigation Manual - Page 8
registered by touching "Navigation" on the "Setup" screen. (See "REGISTERING HOME" on page 87.) The name, location, phone number and icon can be changed. (See "EDITING HOME" on page 87.) The registered points can be used on the "Destination" screen. (See "DESTINATION SEARCH BY HOME" on page 53.) 13 - 2013 Toyota Sequoia | Navigation Manual - Page 9
1. NAVIGATION OPERATION 3. REGISTERING PRESET DESTINATIONS 1 Press the "DEST" button. 4 There are 4 different methods to search preset destinations. (See "DESTINATION SEARCH" on page 52.) 2 Touch one of the preset destination buttons. 5 Touch "Enter". A preset destination can be set to any - 2013 Toyota Sequoia | Navigation Manual - Page 10
" screen. (See "REGISTERING PRESET DESTINATIONS" on page 89.) The name, location, phone number and icon can be changed. (See "EDITING PRESET DESTINATIONS" on page 89.) The registered points can be used on the "Destination" screen. (See "DESTINATION SEARCH BY PRESET DESTINATIONS" on page 53.) 15 - 2013 Toyota Sequoia | Navigation Manual - Page 11
4. OPERATION FLOW: GUIDING THE ROUTE 1 Press the "DEST" button. 3 Touch "Go to ". The navigation system performs a search for the route. 2 There are 10 different methods to search destinations. (See "DESTINATION SEARCH" on page 52.) Page 1 4 Touch "OK", and start driving. Page 2 Routes - 2013 Toyota Sequoia | Navigation Manual - Page 12
DESTINATION 1 Press the "DEST" button. 3 Touch "OK", and start driving. 1 BASIC FUNCTION 2 Touch "Go Home". Routes other than the one on the screen and can be heard via voice guidance. "Go Home" can be used if your home address has been registered. (To register home, see "REGISTERING HOME" - 2013 Toyota Sequoia | Navigation Manual - Page 13
travel/arrival time to the destination Selecting the map mode Deleting map screen buttons Displaying traffic information Searching destinations Searching the destination Changing the selected search area Operating the map location of the selected destination Page 10 32 32 38 39 82 75 36 104 - 2013 Toyota Sequoia | Navigation Manual - Page 14
guidance Adjusting route guidance volume Deleting the destination Displaying the entire route map Page 81 49 77 79 BASIC FUNCTION 1 Useful functions Address book Registering address book entries Marking icons on the map Information Displaying vehicle maintenance Hands-free system (for cellular - 2013 Toyota Sequoia | Navigation Manual - Page 15
Previous Destinations" Function Touch to input a house number and the street address using the input keys. Touch to select one of the POIs that have set destinations. Touch to select one of the 4 categories of emergency service points that have already been stored in the system's database. & - 2013 Toyota Sequoia | Navigation Manual - Page 16
3. QUICK REFERENCE No. Name "Map" "Coordinates" Function Touch to enable setting a destination by specifying a location on the map screen. Touch to enter latitude and longitude coordinates. Touch to select one of the 5 preset destination points as a destination. If a preset destination point has - 2013 Toyota Sequoia | Navigation Manual - Page 17
can be set. Press the "SETUP" button to display the "Setup" screen. No. Name "General" Function Touch to change the selected language, operation sound settings, automatic screen change, etc. Touch to set the voice guidance settings. Touch to set home, preset destinations, address book, areas to - 2013 Toyota Sequoia | Navigation Manual - Page 18
3. QUICK REFERENCE No. Name "Other" "Audio" "Bluetooth*" "Phone" Function Touch to set XM Sports, XM Stocks and XM Fuel Prices. Touch to set iPod and HD Radio™ channel. Touch to set audio devices. Bluetooth® phones and Bluetooth® Page 267 234 156 BASIC FUNCTION 137 1 Touch - 2013 Toyota Sequoia | Navigation Manual - Page 19
NavWeather" "XM Stocks" Function Touch to display the "Apps" screen. Touch to display traffic incidents. Touch to display current fuel prices and gas station locations information. Touch to display map data information. Touch to display personally selected sports teams information. Touch to display - 2013 Toyota Sequoia | Navigation Manual - Page 20
) on the screen. When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the " navigation system is turned on. Images shown on the initial screen can be changed to suit individual preferences. (See page 44.) CAUTION ● When the vehicle - 2013 Toyota Sequoia | Navigation Manual - Page 21
by the buttons on the screen. (Referred to as screen buttons in this manual.) When a screen button is touched, a beep sounds. (To set the to wipe with a soft and dry cloth wrapped around the finger. Do not use chemical cleaners to clean the touch screen. Also, be careful not to apply excessive - 2013 Toyota Sequoia | Navigation Manual - Page 22
OPERATION When searching for an address or name, or entering data, letters and numbers can be input via the screen. Keyboard layout can be changed. (See page 43.) TO INPUT SYMBOLS 1 Touch "Other" to display symbol keys. TO INPUT LETTERS AND NUMBERS 1 Touch "A-Z" to display the alphabet keys - 2013 Toyota Sequoia | Navigation Manual - Page 23
screen. BASIC FUNCTION 2 LIST SCREEN OPERATION When a list is displayed, use the appropriate screen button to scroll through the list. Touch the desired sort in order of brand name. (XM functions) Touch to sort in order of price. (XM functions) "Date" Icon Function Touch to skip to the next or - 2013 Toyota Sequoia | Navigation Manual - Page 24
and brightness of the screen display and the image the camera displays can be adjusted. The display can also be turned off, and/or changed to either day or night mode. (For information regarding audio/video screen adjustment, see "AUDIO SCREEN ADJUSTMENT" on page 198.) Adjusting the screen display - 2013 Toyota Sequoia | Navigation Manual - Page 25
can be adjusted according to the brightness of your surroundings. The display can also be turned off. CHANGING BETWEEN DAY AND NIGHT MODE Depending on the position of the headlight switch, the screen changes to day or night mode. 1 1 Touch " " or " " to select the desired function ("Contrast" or - 2013 Toyota Sequoia | Navigation Manual - Page 26
the "MAP/VOICE" button. To correct the current position manually, see page 104. INFORMATION Use the scroll feature to move the desired point to the center the current position to shown ( ). ). Distance will also be ● While driving, the current position mark is fixed on the screen and the map moves. - 2013 Toyota Sequoia | Navigation Manual - Page 27
AS A DESTINATION A specific point on the map can be set as a destination using the scroll function. 2 This screen is displayed. 1 Touch "Enter ". 2 The registered point is shown by map. on the BASIC FUNCTION To change the icon or name, etc., see "EDITING ADDRESS BOOK ENTRIES" on page 92 - 2013 Toyota Sequoia | Navigation Manual - Page 28
1. BASIC INFORMATION BEFORE OPERATION - 2013 Toyota Sequoia | Navigation Manual - Page 29
1. BASIC INFORMATION BEFORE OPERATION - 2013 Toyota Sequoia | Navigation Manual - Page 30
1. BASIC INFORMATION BEFORE OPERATION SWITCHING THE SCREENS Any of the screen configurations can be selected. Screen button Function Touch to display the following 4 screen configurations: "Dual map", "Compass", "Turn-by-Turn Arrow" and "Freeway Exit List". Touch to display the dual map screen. ( - 2013 Toyota Sequoia | Navigation Manual - Page 31
1. BASIC INFORMATION BEFORE OPERATION - 2013 Toyota Sequoia | Navigation Manual - Page 32
1. BASIC INFORMATION BEFORE OPERATION - 2013 Toyota Sequoia | Navigation Manual - Page 33
1. BASIC INFORMATION BEFORE OPERATION ORIENTATION OF THE MAP The orientation of the map can be changed from north-up to heading-up by touching the orientation symbol at the top left of the screen. STANDARD MAP ICONS Icon Island Name 1 Touch - 2013 Toyota Sequoia | Navigation Manual - Page 34
2. SETUP 1. GENERAL SETTINGS Used for language selection and the on/off settings of operation sounds and automatic screen change, etc. SCREENS FOR GENERAL SETTINGS 1 Press the "SETUP" button. 2 Touch "General". 3 Touch the items to be set. On this screen, the following functions can be - 2013 Toyota Sequoia | Navigation Manual - Page 35
. (See "DELETING PERSONAL DATA" on page 47.) Touch to update program versions. For details, contact your Toyota dealer. Touch to update gracenote database versions. For details, contact your Toyota dealer. SYSTEM TIME SETTINGS Used for changing time zones and the on/off settings of daylight saving - 2013 Toyota Sequoia | Navigation Manual - Page 36
2. SETUP - 2013 Toyota Sequoia | Navigation Manual - Page 37
. 5 Touch "Save". This function is available only in English or Spanish. To change language, see "SELECTING A LANGUAGE" on page 42. 1 2 3 Press the "SETUP" button. Touch "General" on the "Setup" screen. Touch "Keyboard Layout". SELECTING A BUTTON COLOR The color of the screen buttons can be - 2013 Toyota Sequoia | Navigation Manual - Page 38
ABC" or "QWERTY" of "Keyboard Layout" to select a keyboard layout. CHANGING THE STARTUP IMAGE When the engine switch is in the "ACC" or "ON" position, the initial screen will be displayed. An image can be copied from a USB memory and used as the startup image. (For information regarding the opening - 2013 Toyota Sequoia | Navigation Manual - Page 39
2. SETUP - 2013 Toyota Sequoia | Navigation Manual - Page 40
2. SETUP CHANGING THE SCREEN OFF IMAGE Touch "Screen Off" to turn off the screen. An image can be copied from a USB memory and can be set to - 2013 Toyota Sequoia | Navigation Manual - Page 41
settings • Phone display settings • Message settings • Audio setting ® audio setting • Bluetooth • Startup image data • Screen off image data INFORMATION 2 BASIC FUNCTION ● This function is not available while driving. 4 Touch "Delete". 5 Touch "Yes". 47 - 2013 Toyota Sequoia | Navigation Manual - Page 42
recognition prompts can be set to "On" or "Off". This setting can also be changed on the "Shortcut Menu" screen. (See page 238.) When "On" is selected, the audio/ video system can be operated using voice commands. When using the traffic information function, voice guidance can be set to "On" or "Off - 2013 Toyota Sequoia | Navigation Manual - Page 43
2. SETUP No. Function When using the XM NavWeather™ function, the severe weather warning can be set to "On" or "Off". TRAFFIC INCIDENT WARNING Traffic congestion information can be received via voice guidance while being guided to the desired destination. To reset all setup items, touch "Default - 2013 Toyota Sequoia | Navigation Manual - Page 44
of Interest" or "Intersection & Freeway". 1 2 This screen is displayed. Touch "Change State/Province" to display a list of the states/provinces/ territories of the United States and Canada. One of 10 different methods can be used to search a destination. (See pages 53 through 65.) INFORMATION - 2013 Toyota Sequoia | Navigation Manual - Page 45
performs a search for the route. NAVIGATION SYSTEM 3 Touch "OK". To use this function, it is necessary to set a home address. (To register current position to the set home address if "OK" is touched even while driving. ● If a preset destination point has not been registered, a message confirming - 2013 Toyota Sequoia | Navigation Manual - Page 46
1. DESTINATION SEARCH DESTINATION SEARCH BY "Address" There are 2 methods to search a destination by address: (a)Search by city (b)Search by street address 4 Input a city name. 1 2 3 Press the "DEST" button. Touch "Address" on the "Destination" screen. Touch a screen button to select the - 2013 Toyota Sequoia | Navigation Manual - Page 47
.) INFORMATION ● If the navigation system has never been used, this function will not be available. 8 Input a house number. SEARCH BY STREET ADDRESS 1 2 3 If the same address exists in more than one city, the current screen changes - 2013 Toyota Sequoia | Navigation Manual - Page 48
1. DESTINATION SEARCH 6 When the desired street name is found, touch the corresponding screen button. INFORMATION ● A street name can be searched using only the body part of its name. ● For example: S WESTERN AVE • A search can be performed by inputting "S WESTERN AVE", "WESTERN AVE" or "WESTERN - 2013 Toyota Sequoia | Navigation Manual - Page 49
. The desired Point of Interest can be displayed on the map screen. (See "DISPLAY POI ICONS" on page 82.) INFORMATION ● To search for a facility name using multiple search words, put a space between each word. 5 Touch the screen button of the desired destination. - 2013 Toyota Sequoia | Navigation Manual - Page 50
1. DESTINATION SEARCH - 2013 Toyota Sequoia | Navigation Manual - Page 51
1. DESTINATION SEARCH - 2013 Toyota Sequoia | Navigation Manual - Page 52
1. DESTINATION SEARCH The search point is set and the "POI Category" screen will be displayed. (See page 60.) 3 Touch the screen button of the desired item. - 2013 Toyota Sequoia | Navigation Manual - Page 53
Settings" screen when the vehicle is stopped. (See "DELETING PREVIOUS DESTINATIONS" on page 99.) 3 To set an address book entry as a destination using the phone number, the number must already be registered with the address book entry. (See page 91.) INFORMATION DESTINATION SEARCH BY "Address Book - 2013 Toyota Sequoia | Navigation Manual - Page 54
" screen. The display changes to a screen to select police stations, dealers, hospitals or fire stations. ● The navigation system does not guide in areas where route guidance is unavailable. (See page 112.) ● The emergency function can be used even while driving. ● While driving, only the currently - 2013 Toyota Sequoia | Navigation Manual - Page 55
" on page 66.) INFORMATION 3 5 Touch the screen button of the desired item. ● If the same 2 streets cross at more than one intersection, the screen changes and displays the menu to select the city name where the streets intersect. Select the city, and the map location of the selected destination - 2013 Toyota Sequoia | Navigation Manual - Page 56
6 Either a freeway "Entrance" or "Exit" can be selected. ● Be sure to use the complete name of the freeway or highway, including the hyphen, when entering the destination. Freeways page 66.) Guidance starts if "OK" is touched even while driving. However, the cursor cannot be moved. 64 - 2013 Toyota Sequoia | Navigation Manual - Page 57
1. DESTINATION SEARCH DESTINATION SEARCH BY "Coordinates" 3 Touch the destination to be deleted. 1 2 3 Press the "DEST" button. Touch "Coordinates" on the second page of the "Destination" screen. Input the latitude and the longitude. "Delete All": Touch to delete all destinations on the list. - 2013 Toyota Sequoia | Navigation Manual - Page 58
select the desired route from 3 possible routes. (See page 67.) Touch to change the route. (See page 68.) When an arrow facing the desired point is regulations and keep road conditions in mind while driving. If a traffic sign on the road has been changed, the route guidance may not indicate such - 2013 Toyota Sequoia | Navigation Manual - Page 59
guidance may not be available if there is no road data for the changes to 0.5 miles (800 m) automatically. If this occurs, set the destination again. ● If a destination that is not located on a road is set, the vehicle will be guided to the point on a road nearest to the destination. The road - 2013 Toyota Sequoia | Navigation Manual - Page 60
Screen button "Add" "Delete" "Reorder" Function Touch to add destinations. Touch to delete destinations. Touch to reorder destinations. Touch to display the choices available when setting the conditions the system uses to determine the route to the destination. Page 76 77 76 "Preferences" 80 68 - 2013 Toyota Sequoia | Navigation Manual - Page 61
depending on conditions. SCREEN LAYOUT DURING FREEWAY DRIVING During freeway driving, the freeway exit information screen will be displayed For some areas, the roads have not been completely digitized in our database. For this reason, the route guidance may select a road that should not be traveled - 2013 Toyota Sequoia | Navigation Manual - Page 62
Current position Distance to the intersection : Touch to hide the freeway guidance screen. Touch "Intersection", or press the "MAP/ VOICE" button, to change back to the freeway guidance screen. : Touch to hide the intersection guidance screen. Touch "Intersection", or press the "MAP/ VOICE" button - 2013 Toyota Sequoia | Navigation Manual - Page 63
2. ROUTE GUIDANCE OTHER SCREENS - 2013 Toyota Sequoia | Navigation Manual - Page 64
street names may not be pronounced correctly or clearly due to the text-to-speech function. ● On freeways, interstates or other highways with higher speed limits, the voice guidance will be made at earlier points than on city streets in order to allow time to maneuver the vehicle. 72 - 2013 Toyota Sequoia | Navigation Manual - Page 65
2. ROUTE GUIDANCE *: The system indicates a U-turn if the distance between two one-way roads (of opposite directions) is less than 50 feet (15 m) in residential areas or 164 feet (50 m) in non-residential areas. No. Voice guidance "In half - 2013 Toyota Sequoia | Navigation Manual - Page 66
2. ROUTE GUIDANCE - 2013 Toyota Sequoia | Navigation Manual - Page 67
time to the destination are displayed. When the vehicle is not on the guidance route, the distance and direction of the destination are displayed. When driving on the guidance route with more than one destination set, the distance and estimated travel/arrival time from the current position to each - 2013 Toyota Sequoia | Navigation Manual - Page 68
Destination Here" to insert the new destination into the route. 3 4 Touch the desired destination and touch "Move Up" or "Move Down" to change the arrival order. 4 After selecting the destinations, touch "OK". The system searches for the guidance route again, and displays the entire route. 76 - 2013 Toyota Sequoia | Navigation Manual - Page 69
2. ROUTE GUIDANCE DELETING DESTINATIONS A set destination can be deleted. 4 Touch "Yes" to delete the destination(s). If "Yes" is touched, the data cannot be recovered. If more than 1 destination has been set, the system will recalculate the route(s) to the set destination(s) as necessary. If "No - 2013 Toyota Sequoia | Navigation Manual - Page 70
route guidance is operating, the route can be changed to detour around a section of the route where a delay is caused by road repairs, or an accident, etc. "1 Touch "Route". 2 Touch "Detour". ● This picture shows an example of how the system would guide around a delay caused by a traffic jam. 3 - 2013 Toyota Sequoia | Navigation Manual - Page 71
List" Function Touch to start guidance. Touch to display a list of the turns required to reach the destination. ● However, not all road names in the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through 2 or more cities), the name - 2013 Toyota Sequoia | Navigation Manual - Page 72
"Route". "OK": Touch to start guidance. "Edit Route": Touch to change a route. (See page 68.) TO SELECT ROUTE FEATURES 2 Touch "Preferences". A number of choices are available when setting the conditions the system uses to determine the route to the destination. 1 Touch "Route". 3 Touch - 2013 Toyota Sequoia | Navigation Manual - Page 73
the desired route preference. 3 Touch "Start from Adjacent Road". The system will avoid using routes that include items whose indicators are off. INFORMATION 4 After selecting the desired route preference, touch "OK". ● When there is no adjacent road, this screen button will not be displayed - 2013 Toyota Sequoia | Navigation Manual - Page 74
with the current position displayed, will be returned to. A screen with a limited choice of Points of Interest will be displayed. (To change the displayed POI list, see page 103.) SHOW ON MAP DISPLAY POI ICONS POI icons such as gas stations and restaurants can be displayed on the map screen. Their - 2013 Toyota Sequoia | Navigation Manual - Page 75
map screen, touch "Clear". "Other POIs": Touch to display other Points of Interest categories if the desired Points of Interest cannot be found on the limited choice screen. "Find Local POI": Touch to search for the nearest POIs. Then select one of the categories. The system will list the points - 2013 Toyota Sequoia | Navigation Manual - Page 76
overlaps with the cursor, touch "Enter ". The screen changes and displays the map location of the selected destination and route of Interest icons can be selected on the map screen as a destination and can be used for route guidance. 2 Touch "POI Icons". 1 Directly touch the desired Point of Interest - 2013 Toyota Sequoia | Navigation Manual - Page 77
route can be stored and retraced on the display. INFORMATION TO STOP RECORDING THE ROUTE TRACE 1 Touch "Show on Map". ● This feature is available when the map scale is more than 30 miles (50 km). TO START RECORDING THE ROUTE TRACE 2 Touch "Route Trace". 3 1 NAVIGATION SYSTEM Touch - 2013 Toyota Sequoia | Navigation Manual - Page 78
3. ADDRESS BOOK 1. NAVIGATION SETTINGS Points or areas on the map can be registered. The registered points can be used on the "Destination" screen. (See "DESTINATION SEARCH BY HOME" on page 53, and "DESTINATION SEARCH BY 'Address Book'" on page 61.) Registered areas to avoid, - 2013 Toyota Sequoia | Navigation Manual - Page 79
3. ADDRESS BOOK 4 Touch the desired screen button. 5 Touch the desired screen button and enter the location in the same way as for a destination search. (See "DESTINATION SEARCH" on page 52.) No. Function Registering home Editing home Deleting home Page 87 87 88 When registration of home is - 2013 Toyota Sequoia | Navigation Manual - Page 80
on the map. To edit location information. To edit the phone number. To change the icon to be displayed on the map. Page 93 Touch "Yes" to If preset destination has been registered, that information can be recalled by using "Preset Destinations" on the "Navigation Settings" screen. (See " - 2013 Toyota Sequoia | Navigation Manual - Page 81
3. ADDRESS BOOK No. Function Registering a preset destination Editing a preset destination Deleting a preset destination Page 89 89 90 6 Touch a position for this preset destination. REGISTERING PRESET DESTINATIONS 1 2 3 4 Press the "SETUP" button. Touch "Navigation" on the "Setup" screen. - 2013 Toyota Sequoia | Navigation Manual - Page 82
. Function To edit the preset destination name. The name can be displayed on the map. To edit location information. To edit the phone number. To change the icon to be displayed on the map. Page 93 Touch the preset destination to be deleted. 94 94 Screen button 92 "Select All" Touch - 2013 Toyota Sequoia | Navigation Manual - Page 83
3. ADDRESS BOOK SETTING UP THE "Address Book" Points or areas on the map can be registered. REGISTERING ADDRESS BOOK ENTRIES 1 2 3 4 Press the "SETUP" button. Touch "Navigation" on the "Setup" screen. Touch "Address Book" on the "Navigation Settings" screen. Touch "New". 3 1 2 3 Press the " - 2013 Toyota Sequoia | Navigation Manual - Page 84
93 94 94 92 1 2 3 4 Press the "SETUP" button. Touch "Navigation" on the "Setup" screen. Touch "Address Book" on the "Navigation Settings" screen. Touch "Edit". To change the icon to be displayed on the map. "Show Name on Map": The name of an address book entry can be set to be displayed - 2013 Toyota Sequoia | Navigation Manual - Page 85
3. ADDRESS BOOK - 2013 Toyota Sequoia | Navigation Manual - Page 86
3. ADDRESS BOOK - 2013 Toyota Sequoia | Navigation Manual - Page 87
3. ADDRESS BOOK 5 Touch the address to be deleted. 4 Touch the desired screen button. Screen button "Select All" "Unselect All" Function Touch to select all registered addresses. Touch to cancel the "Select All" function. No. Function Registering areas to avoid Editing areas to avoid - 2013 Toyota Sequoia | Navigation Manual - Page 88
on the "Navigation Settings" screen. Touch "Edit". "Adjust Location": Touch to adjust the position in smaller increments. 7 8 Touch "Enter". Touch either or to change the size of the area to be avoided. 5 Touch the desired area to avoid. 9 Touch "OK". When registration of an area to avoid is - 2013 Toyota Sequoia | Navigation Manual - Page 89
3. ADDRESS BOOK 6 Touch "Edit" next to the item to be edited. - 2013 Toyota Sequoia | Navigation Manual - Page 90
3. ADDRESS BOOK - 2013 Toyota Sequoia | Navigation Manual - Page 91
3. ADDRESS BOOK 5 Touch the area to be deleted. DELETING PREVIOUS DESTINATIONS Previous destinations can be deleted. 1 2 Screen button "Select All" "Unselect All" Function Touch to select all registered areas to avoid. Touch to cancel the "Select All" function. Press the "SETUP" button. Touch " - 2013 Toyota Sequoia | Navigation Manual - Page 92
4. SETUP 1. DETAILED NAVIGATION SETTINGS Settings are available for driving speeds, favorite POI categories, automatic screen change, " Off" function, etc. 4 Touch the items to be set. 1 Press the "SETUP" button. 5 Touch "Save". SCREENS FOR NAVIGATION SETTINGS 2 Touch "Navigation". 3 - 2013 Toyota Sequoia | Navigation Manual - Page 93
POSITION/TIRE CHANGE CALIBRATION" on page 104.) Touch to set the display of pop-up information to "On" or "Off". (See "POP-UP INFORMATION" on page 105.) Touch to set IPD road guidance to "On" or "Off". (For information on IPD roads, see page 74.) DRIVING SPEEDS The speed that is used for the - 2013 Toyota Sequoia | Navigation Manual - Page 94
The displayed time to the destination is the approximate driving time that is calculated based on the selected speeds it is not desirable to reroute. INFORMATION AUTO AVOID TRAFFIC The guidance route automatically changes to another route to avoid heavy congestion when "Avoid Traffic" is turned on. - 2013 Toyota Sequoia | Navigation Manual - Page 95
group. ● When the "Traffic Information" indicator is dimmed, "Avoid Traffic", "Traffic Incident Warning" and "Show Free Flowing Traffic" will not operate. POI CATEGORY CHANGE (SELECT POI ICONS) Select up to 6 POI icons to be displayed on the map screen. If the desired POI category is not on the - 2013 Toyota Sequoia | Navigation Manual - Page 96
or hidden. CURRENT POSITION/TIRE CHANGE CALIBRATION The current position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted on the accuracy of a current position, see "LIMITATIONS OF THE NAVIGATION SYSTEM" on page 111. Touch "Save". 104 - 2013 Toyota Sequoia | Navigation Manual - Page 97
4. SETUP - 2013 Toyota Sequoia | Navigation Manual - Page 98
4. SETUP 4 Touch "Pop-up Information". 5 6 Touch "On" or "Off". Touch "Save". When "Pop-up Information" is turned off, the following messages will not be displayed. This message appears when the map scale is over 0.5 miles (800 m). This message appears when the map is switched to dual map - 2013 Toyota Sequoia | Navigation Manual - Page 99
Vehicle Settings" screen. Touch the desired screen button. 3 Touch "Maintenance". When the vehicle needs to be serviced, the screen button color will change to orange. Screen button "Engine oil" "Oil filter" "Rotation" "Tires" "Battery" Function Replace engine oil Replace engine oil filter Rotate - 2013 Toyota Sequoia | Navigation Manual - Page 100
"Wipers" "Coolant" "Brake oil" "Trans. fluid" "Service" "Air filter" "Personal" Function Replace brake pads or linings maintenance information, refer to "Scheduled Maintenance Guide" or "Owner's Manual Supplement". ● Depending on driving or road conditions, the actual date and distance maintenance - 2013 Toyota Sequoia | Navigation Manual - Page 101
4. SETUP DEALER SETTING Dealer information can be registered in the system. With dealer information registered, route guidance to the dealer is available. 6 Touch "Edit" next to the item to be edited. 1 2 3 4 Press the "SETUP" button. Touch "Vehicle" screen. on the "Setup" Screen button "Dealer - 2013 Toyota Sequoia | Navigation Manual - Page 102
4. SETUP - 2013 Toyota Sequoia | Navigation Manual - Page 103
turning on a turntable in a parking lot. • When leaving a covered parking lot or parking garage. • When a roof carrier is installed. • When driving with tire chains installed. • When the tires are worn. • After replacing a tire or tires. • When using tires that are smaller or larger than the factory - 2013 Toyota Sequoia | Navigation Manual - Page 104
other reasons. • The road and map data stored in the navigation system may not be complete or may not be the latest version. After replacing a tire, implement the operation described in the "TIRE CHANGE CALIBRATION". (See page 105.) INFORMATION ● This navigation system uses tire turning data and - 2013 Toyota Sequoia | Navigation Manual - Page 105
button or the switch on the steering wheel. No. Name Function The condition of may not function when a Bluetooth® phone is used in the following conditions and/or places: • is behind the seat or in the glove box and console box). • The cellular phone touches or is covered with metal materials - 2013 Toyota Sequoia | Navigation Manual - Page 106
level of reception may not be displayed depending on the phone you have. When the cellular phone is out of the service area or in a place inaccessible by radio waves, "No Service" is displayed. Press to display the hands-free operation screen. Press to display the "Setup" screen. Touching "Phone" or - 2013 Toyota Sequoia | Navigation Manual - Page 107
using Bluetooth® audio and hands-free at the same time, the following problems may occur: ® connection may be • The Bluetooth cut. ® • Noise may be heard on the Bluetooth audio playback. ● This system supports the following services is necessary when using Entune. (See "ENTUNE SERVICE" on page 270 - 2013 Toyota Sequoia | Navigation Manual - Page 108
http://www.toyota.com/ Bluetooth/ to find approved Bluetooth® phones for this system. INFORMATION Bluetooth is a registered trademark of Bluetooth SIG, Inc. USING THE PHONE SWITCH By pressing the phone switch, a call can be received or ended without taking your hands off the steering wheel. ● The - 2013 Toyota Sequoia | Navigation Manual - Page 109
SWITCHES WHEN SELLING OR DISPOSING OF THE VEHICLE A lot of personal data is registered when the hands-free system is used. When selling or disposing of the vehicle, initialize the data. (See "DELETING PERSONAL DATA" on page 47.) The following data in the system can be - 2013 Toyota Sequoia | Navigation Manual - Page 110
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Canada CAUTION ● NOTE Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must - 2013 Toyota Sequoia | Navigation Manual - Page 111
the radiator and person's body (excluding extremities: hands, wrists, feet and ankles). Cet équipement se conforme aux limites d'exposition aux radiations établies par Industrie Canada pour un environnement non contrôlé ainsi qu'aux directives d'exposition aux fréquences radioélectriques (RF) émises - 2013 Toyota Sequoia | Navigation Manual - Page 112
® phone cannot be registered while driving. See "REGISTERING A Bluetooth® into the Bluetooth® device, see the manual that comes with it. Depending on the 1 Press the button or the on the steering wheel. switch 4 PHONE 2 Touch "Yes" to When using the same phone, it is not necessary to - 2013 Toyota Sequoia | Navigation Manual - Page 113
to be deleted. Touch "Yes" to delete one or more. Touch the device to be deleted, then touch "Remove". Touch "Yes". 2 3 For automatic connection, see "CHANGING 'Bluetooth* Power'" on page 163. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. 122 - 2013 Toyota Sequoia | Navigation Manual - Page 114
"Bluetooth* Power" is turned off, it is necessary to connect Bluetooth® manually. 1 When the engine switch is in the "ACC" or "ON" ACC" or "ON" position. INFORMATION Press the button or the on the steering wheel. Touch "Connect Phone". switch 2 4 PHONE 3 Touch the screen button corresponding - 2013 Toyota Sequoia | Navigation Manual - Page 115
1. PHONE OPERATION 5 When the connection is completed, this screen is displayed. Now you can use the Bluetooth® phone. When a phone is connected while Bluetooth® audio is playing This screen on purpose, such as turning it off, this does not happen. Reconnect the Bluetooth® phone manually. 124 - 2013 Toyota Sequoia | Navigation Manual - Page 116
can be made by using the phonebook data which is transferred from the registered cellular phone. The phonebook changes depending on the phone the phone number. This cannot be operated while driving. 1 2 Press the button or the on the steering wheel. switch 1 Touch "Contacts". 4 Touch the - 2013 Toyota Sequoia | Navigation Manual - Page 117
IS EMPTY 3 Transfer the phonebook data to the system using the Bluetooth® phone. The operation for phonebook data being " to automatically transfer the phonebook from the connected phone. Touch "Manual" to transfer the phonebook manually. (See "TRANSFERRING A PHONE NUMBER" on page 140.) Touch - 2013 Toyota Sequoia | Navigation Manual - Page 118
using registered phone numbers which can be selected from a phonebook. (See "REGISTERING THE SPEED DIAL" on page 146 for registering the speed dial.) This can be done while driving Call History". 4 PHONE 2 The list to be displayed can be changed by touching the "Speed Dial 1", "Speed Dial 2" or " - 2013 Toyota Sequoia | Navigation Manual - Page 119
SYSTEM" on page 238.) This can be operated while driving. CALLS CAN BE MADE USING THE LATEST CALL HISTORY ITEM 1 2 3 4 Press the button or the switch on the steering wheel to display the "Phone" screen. Press the switch on the steering wheel to display the "Call History" screen. Press the switch - 2013 Toyota Sequoia | Navigation Manual - Page 120
Short or abbreviated names in the phonebook may not be recognized. Change names in the phonebook to full names. Sometimes a voice recognition "Shortcut Menu" screen is dimmed, the phone number voice recognition cannot be used. Check the Bluetooth® phone connection. 2 Say the phone number. In the - 2013 Toyota Sequoia | Navigation Manual - Page 121
1. PHONE OPERATION - 2013 Toyota Sequoia | Navigation Manual - Page 122
. To adjust the volume of a received call: Touch "-" or "+", turn the "PWR·VOL" knob, or use the volume switch on the steering wheel. INFORMATION 4 PHONE ● During international phone calls, the other party's name or number may not be displayed correctly depending on the type of cellular phone - 2013 Toyota Sequoia | Navigation Manual - Page 123
up the phone: Touch or press the wheel. switch on the steering TONE SIGNAL If a continuous tone signal is registered in a phonebook, this screen appears. (If not registered, "Send" and "Clear" are not displayed.) This can be operated while driving. ● Changing from hands-free call to cellular phone - 2013 Toyota Sequoia | Navigation Manual - Page 124
desirable to operate an answering machine or use a telephone service in a bank for example. The phone is touched or the switch on the steering wheel is pressed during an interrupted call, the party your cellular phone does not support HFP Ver. 1.5, this function cannot be used. ● The ring tone that - 2013 Toyota Sequoia | Navigation Manual - Page 125
the function. Touch "-" or "+", turn the "PWR·VOL" knob, or use the volume switch on the steering wheel to adjust the message read out volume. The message read out function is available even while driving. When the received message is an email and "Update Message Read Status on Phone" is set to "On - 2013 Toyota Sequoia | Navigation Manual - Page 126
1. PHONE OPERATION REPLYING (QUICK REPLY) EDITING REPLY MESSAGES 1 Touch "Reply". 1 Reply messages can be edited while the vehicle is parked. Touch "Edit". 2 Touch the screen button corresponding to the desired message. 2 Touch the screen button corresponding to the desired message. 4 - 2013 Toyota Sequoia | Navigation Manual - Page 127
"On", the message will be automatically read out. (See "MESSAGE SETTINGS" on page 150.) For SMS/MMS, touching or pressing the switch on the steering wheel calls the sender. (See page 130.) To check the message later, touch "Ignore" or . 136 - 2013 Toyota Sequoia | Navigation Manual - Page 128
2. SETUP 1. PHONE SETTINGS The phonebook can be edited. Volume, display and message settings can also be changed. PHONE SOUND SETTINGS The call and ring tone volume can be adjusted. A ring tone can be selected. 1 Press the "SETUP" button. 1 Touch "Phone Sound Settings". 2 - 2013 Toyota Sequoia | Navigation Manual - Page 129
the "Phone Sound Settings" screen. Touch "Yes". PHONEBOOK The call history can be deleted and phonebook and speed dial settings can be changed. 3 Touch "OK". 1 2 3 Press the "SETUP" button. Touch "Phone" on the "Setup" screen. Touch "Phonebook". RING TONE SETTING 1 Touch "Ring Tone" on the - 2013 Toyota Sequoia | Navigation Manual - Page 130
2. SETUP 4 Perform each setting according to the procedures outlined on the following pages. 5 Perform each setting according to the procedures outlined on the following pages. INFORMATION - 2013 Toyota Sequoia | Navigation Manual - Page 131
2. SETUP - 2013 Toyota Sequoia | Navigation Manual - Page 132
Add Contacts". If the phonebook contains phonebook data, this screen is displayed. 3 3 Touch "On". Transfer the phonebook data to the system using the Bluetooth® phone. Depending on the type of cellular phone, OBEX authentication may be required when transferring phonebook data. Enter "1234" into - 2013 Toyota Sequoia | Navigation Manual - Page 133
2. SETUP 4 When the transfer is complete, "Done" will appear on the screen. Touch "Done". When another Bluetooth® device is connected 4 This screen is displayed. The following operations are performed in the same manner as when they are performed from the "Setup" screen. When another Bluetooth® - 2013 Toyota Sequoia | Navigation Manual - Page 134
2. SETUP 3 Input the phone number and touch "OK". - 2013 Toyota Sequoia | Navigation Manual - Page 135
2. SETUP - 2013 Toyota Sequoia | Navigation Manual - Page 136
2. SETUP 2 Touch the desired data or "Select All", then touch "Delete". 6 Touch "Yes". INFORMATION ● When a Bluetooth® phone is deleted, the phonebook data will be deleted at the same time. SPEED DIALS SETTING Multiple data can be selected and deleted at the same time. Speed dials can be - 2013 Toyota Sequoia | Navigation Manual - Page 137
2. SETUP - 2013 Toyota Sequoia | Navigation Manual - Page 138
2. SETUP 5 If a location that is already in use is touched, this screen will be displayed. 4 Touch "Yes" to set new speed dial. 5 Touch "Yes" to replace it. Touch the desired data to be registered. 6 When this screen is displayed, the operation is complete. 4 PHONE 6 - 2013 Toyota Sequoia | Navigation Manual - Page 139
2. SETUP 4 Touch "Options". 2 Touch the desired data, or to delete all the data touch "Select All", then touch "Delete". 5 Touch "Set Speed Dial". Multiple data can be selected and deleted at the same time. 3 Touch "Yes". DELETING CALL HISTORY The call history can be deleted. 6 This - 2013 Toyota Sequoia | Navigation Manual - Page 140
after call history has been displayed 4 1 2 Multiple data can be selected and deleted at the same time. Press the button or the on the steering wheel. switch PHONE Touch "Call History" on the "Phone" screen. Touch the desired history to be deleted. 7 3 Touch "Yes". - 2013 Toyota Sequoia | Navigation Manual - Page 141
MESSAGE SETTINGS Message settings can be changed. THE "Messaging Settings" SCREEN CAN ALSO BE DISPLAYED 1 2 3 Press the "SETUP" button. Touch "Phone" on the "Setup" screen. Touch "Messaging Settings". 1 2 3 Press the button or the on the steering wheel. switch Touch "Messages" on the "Phone - 2013 Toyota Sequoia | Navigation Manual - Page 142
MESSAGE READ OUT VOLUME SETTINGS" on page 152.) Touch to set the cellular phone's message read and unread status update function to "On" or "Off". Touch to edit "Edit Quick Reply Messages". (See "EDIT QUICK REPLY MESSAGES ● Depending on the phone, these functions may not be available. 151 - 2013 Toyota Sequoia | Navigation Manual - Page 143
2. SETUP NEW MESSAGE NOTIFICATION TONE SETTINGS A new message voice notification tone can be selected. MESSAGE READ OUT VOLUME SETTINGS Message read out volume can be adjusted. 1 Touch "New Message Notification Tone". 1 Touch "Message Readout Volume". 2 2 Touch the desired new message - 2013 Toyota Sequoia | Navigation Manual - Page 144
been stored. 2 Touch "Yes". PHONE DISPLAY SETTINGS The phone display settings can be changed. 1 Touch "Edit Quick Reply Messages". 1 2 3 Press the "SETUP" button according to the procedures outlined on the following pages. 3 4 Use the software keyboard to edit the message. Touch "OK". 5 - 2013 Toyota Sequoia | Navigation Manual - Page 145
screen, the following functions can be operated: No. Function Touch to change the incoming call display. (See "INCOMING CALL DISPLAY" on page the steering wheel switches. To reset all setup items, touch "Default". INFORMATION ● Depending on the phone, these functions may not be available even if - 2013 Toyota Sequoia | Navigation Manual - Page 146
2. SETUP 3 Touch "Save". INITIALIZING THE SETTINGS The settings can be initialized. ROTATING CONTACT IMAGES For PBAP compatible models, when "Contact Image for Incoming Calls" is set to "On", images stored together with phone numbers in the cellular phone's phonebook will be transferred and - 2013 Toyota Sequoia | Navigation Manual - Page 147
2. SETUP 2. Bluetooth® SETTINGS A Bluetooth® device can be set up. REGISTERED DEVICES A Bluetooth® device can be registered, deleted or set up. 1 Press the "SETUP" button. 1 2 3 Press the "SETUP" button. Touch "Bluetooth*" on the "Setup" screen. Touch "Registered Devices". 2 Touch "Bluetooth - 2013 Toyota Sequoia | Navigation Manual - Page 148
When 5 Bluetooth® devices have already been registered" on page 158. When using the same device, it is not necessary to register it again. 2 details about entering the passcode into the Bluetooth® device, see the manual that comes with it. When another Bluetooth® device is currently connected, - 2013 Toyota Sequoia | Navigation Manual - Page 149
Bluetooth® DEVICE 1 Touch "Remove". unique to each device. It cannot be changed. ® • If two Bluetooth devices have been registered with the same device name Portable Player from": There are 2 portable player connection settings available; "Vehicle" and "Portable Player". Multiple devices can be - 2013 Toyota Sequoia | Navigation Manual - Page 150
on the portable player, the "Vehicle" or "Portable Player" connection method may be best. As such, refer to the manual that comes with the portable player. 4 PHONE 4 Use the software keyboard to input the device name and touch "OK". 3 Touch "OK". SELECTING A Bluetooth® PHONE If more than - 2013 Toyota Sequoia | Navigation Manual - Page 151
2. SETUP 3 Touch "Connect Phone". 6 When the result message is displayed, the Bluetooth® phone can be used. 4 Touch the phone to be connected. When a phone is connected while Bluetooth® audio is playing This screen is displayed, and the Bluetooth® audio will stop - 2013 Toyota Sequoia | Navigation Manual - Page 152
"Bluetooth*" on the "Setup" screen. Touch "Connect Portable Player". PHONE 6 When the result message is displayed, the portable player can be used. 4 Touch the desired portable player to be connected. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. The indicator of the selected - 2013 Toyota Sequoia | Navigation Manual - Page 153
the screen. (See pages 116 and 213.) "Device Name" "Passcode" DETAILED Bluetooth® SETTINGS The Bluetooth® settings can be confirmed and changed. "Device Address" "Profiles" 1 2 3 Press the "SETUP" button. Touch "Bluetooth*" on the "Setup" screen. Touch "Detailed Bluetooth* Settings". If it - 2013 Toyota Sequoia | Navigation Manual - Page 154
2. SETUP CHANGING THE Bluetooth® SETTINGS The Bluetooth® settings can be changed according to the following procedures. 3 Touch "Save". In the event the state of "Bluetooth* Power" is changed from "Off" to "On", Bluetooth® connection will begin. - 2013 Toyota Sequoia | Navigation Manual - Page 155
2. SETUP - 2013 Toyota Sequoia | Navigation Manual - Page 156
2. SETUP 4 PHONE 165 - 2013 Toyota Sequoia | Navigation Manual - Page 157
media mode. Turn to step up and step down the station band, change to the next or previous satellite radio channel, or skip to the next or previous track, DVD chapter, etc. Also, the knob can be used to enter selections on the track/file and album/folder screens by pressing it. Press - 2013 Toyota Sequoia | Navigation Manual - Page 158
1. AUDIO/VIDEO SYSTEM OPERATION No. Name "MEDIA" button "RADIO" button "PWR·VOL" knob Function Press to display the media control screen. Press to display the radio control screen. Press to turn the audio system on and off, and turn to adjust the volume. Page 171 171 171 5 AUDIO/VIDEO SYSTEM - 2013 Toyota Sequoia | Navigation Manual - Page 159
vehicles sold in U.S.A. and Canada: Part 15 of the FCC Rules FCC Warning: Changes or modifications in construction not changes yourself. This is an intricate unit that uses a laser pickup to retrieve information from the surface of compact discs. The laser is carefully shielded so that its rays - 2013 Toyota Sequoia | Navigation Manual - Page 160
knob to adjust the volume. The system turns on in the last mode used. A function that enables automatic return to the previous screen from the audio Every time the "RADIO" or "MEDIA" button is pressed, the audio control mode changes. ● If a disc is not inserted, the DVD player cannot be turned on. - 2013 Toyota Sequoia | Navigation Manual - Page 161
stereo channels and of the front and rear sound levels is also important. Keep in mind that when listening to a stereo recording or broadcast, changing the right/left balance will increase the volume of one group of sounds while decreasing the volume of another. 4 5 Touch the desired items to - 2013 Toyota Sequoia | Navigation Manual - Page 162
disassemble or oil any part of the DVD player. Do not insert anything other than a disc into the slot. INFORMATION ● The player is intended for use with 4.7 in. (12 cm) discs only. 173 - 2013 Toyota Sequoia | Navigation Manual - Page 163
connected to the AUX port can be enjoyed. For details, refer to "Owner's Manual". USB PORT A USB memory/iPod can be connected to the USB " button repeatedly to change to USB memory/iPod mode. INFORMATION CAUTION ● Do not connect portable audio device or operate the controls while driving. ● When a - 2013 Toyota Sequoia | Navigation Manual - Page 164
"Apps" tab or press the "RADIO" button repeatedly to select the desired tab. 5 AUDIO/VIDEO SYSTEM STEP UP AND DOWN THE STATION BAND To change the preset station to a different one, follow the same procedure. 1 Turn the knob clockwise to step up the station band or counterclockwise to step down - 2013 Toyota Sequoia | Navigation Manual - Page 165
OPERATION SELECTING A STATION Tune in the desired station using one of the following methods. Preset tuning: Touch messages from radio stations, - search for a stronger signal station. RBDS features are available only when listening to an FM station that broadcasts RBDS information and the "FM info - 2013 Toyota Sequoia | Navigation Manual - Page 166
Easy Listening) • Inform (Information) • Jazz • News • Oldies • Other • Pop Music • Religion • Rock • R&B (Rhythm and Blues) • Sports • Talk • Traffic (Not available when "HD Radio Settings" are set to analog.) • Alert (Emergency Alert) "Traffic": Touch to seek a traffic program station. "TRAF SEEK - 2013 Toyota Sequoia | Navigation Manual - Page 167
with no static or distortion. For more information, and a guide to available radio stations and programming, refer to www.hdradio.com. acquired, the logo will change to a bright orange color. The song title, artist name and music genre will appear on the screen when available by the radio station. - 2013 Toyota Sequoia | Navigation Manual - Page 168
AVAILABLE HD Radio™ TECHNOLOGY MULTICAST On the FM radio frequency most digital stations have "multiple" or supplemental programs on one FM station. 2 Open the cover and connect iPod using time "Multicast" is touched, the supplemental program changes. If "Multicast" is touched when tuned to the - 2013 Toyota Sequoia | Navigation Manual - Page 169
1. AUDIO/VIDEO SYSTEM OPERATION TROUBLESHOOTING GUIDE Experience Mismatch of time alignment- a user may hear a digital multicast content is not available until HD Radio™ broadcast can be decoded and make the audio available. This takes up to 7 seconds. Data service issue by the radio broadcaster. - 2013 Toyota Sequoia | Navigation Manual - Page 170
1. AUDIO/VIDEO SYSTEM OPERATION HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio™ and the HD, HD Radio, and "Arc" logos are proprietary trademarks of iBiquity Digital Corp. 5 AUDIO/VIDEO SYSTEM 181 - 2013 Toyota Sequoia | Navigation Manual - Page 171
service is necessary. An XM Satellite Radio is a tuner designed exclusively to receive broadcasts provided under a separate subscription. Availability is limited to change. SATELLITE TUNER TECHNOLOGY NOTICE Toyota's an XM service or when reporting a problem. If "CH 000" is selected using the "TUNE - 2013 Toyota Sequoia | Navigation Manual - Page 172
SYSTEM 3 Turn the "TUNE·SCROLL" knob to select the next or previous channel. Turning the knob quickly allows rapid scrolling through the channel list. To change the preset channel to a different one, follow the same procedure. 183 - 2013 Toyota Sequoia | Navigation Manual - Page 173
OPERATION SELECTING A CHANNEL Tune in the desired channel using one of the following methods. Preset tuning: Touch current category: Press the " " or " " button of "SEEK/TRACK". The radio will change up or down to a channel within the current channel category. DISPLAYING THE TITLE AND NAME 1 - 2013 Toyota Sequoia | Navigation Manual - Page 174
table below to identify the problem, take the suggested corrective Toyota certified dealer for assistance. You have not subscribed to XM Satellite Radio. The radio is being updated available. Wait for about 2 seconds until the radio returns to the previous channel or "CH 001". If it does not change - 2013 Toyota Sequoia | Navigation Manual - Page 175
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions This XM tuner supports "Audio Services" (Music and - 2013 Toyota Sequoia | Navigation Manual - Page 176
of "Apps" can be adjusted using the switches on the steering wheel. ● If internet radio has never been listened to by activating "Apps" from the "Information" screen, the "Apps" tab will be dimmed. *: For 5 AUDIO/VIDEO SYSTEM details, refer to http://www.toyota.com/entune/ or call 1800-331-4331 - 2013 Toyota Sequoia | Navigation Manual - Page 177
in the "ACC" or "ON" position. (c)The parking brake is applied. While driving in DVD video mode, only the DVD's audio can be heard. 3 Press the To reduce the chance of injury in case of an accident or sudden stop while driving, keep the display closed. ● Take care not to jam your hand while the - 2013 Toyota Sequoia | Navigation Manual - Page 178
1. AUDIO/VIDEO SYSTEM OPERATION INFORMATION ● Under extremely cold conditions, the screen may react slowly or operation sound may become louder. ● If a disc is inserted with the label facing down, it cannot be played. SELECTING A DESIRED TRACK - 2013 Toyota Sequoia | Navigation Manual - Page 179
1. AUDIO/VIDEO SYSTEM OPERATION , : Touch to move the list up or down by 5 track groups. If either of these screen buttons is touched when the top/bottom page of the list is displayed, the last/first page is displayed. "SEEK/TRACK" button: Press the " " or " " button of "SEEK/TRACK" to scroll - 2013 Toyota Sequoia | Navigation Manual - Page 180
1. AUDIO/VIDEO SYSTEM OPERATION INFORMATION - 2013 Toyota Sequoia | Navigation Manual - Page 181
1. AUDIO/VIDEO SYSTEM OPERATION - 2013 Toyota Sequoia | Navigation Manual - Page 182
1. AUDIO/VIDEO SYSTEM OPERATION - 2013 Toyota Sequoia | Navigation Manual - Page 183
1. AUDIO/VIDEO SYSTEM OPERATION - 2013 Toyota Sequoia | Navigation Manual - Page 184
" tab is selected. "Menu", "Top Menu" Touch "Options" on the "DVD" screen, then touch "Wide" on the "DVD Options" screen. The screen mode can be changed. If "Full Screen" is touched when the vehicle is completely stopped and the parking brake is applied, the video screen returns. Touch to stop the - 2013 Toyota Sequoia | Navigation Manual - Page 185
The "DVD Options" screen will appear. 1 Select the menu item using , and and touch "Enter". The player starts playing the disc from menu items can be selected by touching them directly. (For details, see the manual that comes with the DVD disc provided separately.) "Audio" 197 "Subtitle" 197 - 2013 Toyota Sequoia | Navigation Manual - Page 186
is displayed. AUDIO/VIDEO SYSTEM 1 2 Touch "Audio" on the "DVD Options" screen. Each time "Change" is touched, the audio language is changed. The languages available are restricted to those available on the DVD disc. CHANGING THE ANGLE The angle can be selected for discs that are multi-angle - 2013 Toyota Sequoia | Navigation Manual - Page 187
Touch to weaken the tone of the screen. AUDIO SCREEN ADJUSTMENT The brightness, contrast, color and tone of the screen can be adjusted. In addition, the display can be turned off and the screen can be changed to either day or night mode. 3 After adjusting the screen, touch "OK". The screen - 2013 Toyota Sequoia | Navigation Manual - Page 188
1. AUDIO/VIDEO SYSTEM OPERATION - 2013 Toyota Sequoia | Navigation Manual - Page 189
1. AUDIO/VIDEO SYSTEM OPERATION 4 Touch "Save" on the "DVD Settings" screen. - 2013 Toyota Sequoia | Navigation Manual - Page 190
1. AUDIO/VIDEO SYSTEM OPERATION Code 0514 1001 0618 0405 0920 0519 2608 1412 1620 1922 1821 1115 0512 0101 0102 0106 0113 0118 0119 0125 0126 0201 0205 0207 0208 0209 0214 0215 0218 English Japanese French German Italian Spanish Chinese Dutch Language Code 0301 0315 0319 0325 0401 0426 0515 0520 - 2013 Toyota Sequoia | Navigation Manual - Page 191
1. AUDIO/VIDEO SYSTEM OPERATION Code 0923 1009 1023 1101 1111 1112 1113 1114 1119 1121 1125 1201 1214 1215 1220 1222 1307 1309 1311 1312 1314 1315 1318 1319 1320 1325 1401 1405 1415 202 Language Hebrew Yiddish Javanese Georgian Kazakh Greenlandic Cambodian Kannada Kashmiri Kurdish Kirghiz Latin - 2013 Toyota Sequoia | Navigation Manual - Page 192
on the screen: It indicates that the DVD region code is not set properly. If the malfunction is not rectified: Take your vehicle to your Toyota dealer. INFORMATION 5 AUDIO/VIDEO SYSTEM Vietnamese Volapük Wolof Xhosa Yoruba Zulu ● If an MP3/WMA disc contains CD-DA files only, the CD-DA files - 2013 Toyota Sequoia | Navigation Manual - Page 193
DVD player conforms to NTSC/PAL color TV formats. DVD video discs conforming to another format such as SECAM cannot be used. Region codes: Some DVD of data assigned to the picture is changed depending on the picture format has also been adopted. Audio data is stored using PCM and Dolby Digital, - 2013 Toyota Sequoia | Navigation Manual - Page 194
that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or - 2013 Toyota Sequoia | Navigation Manual - Page 195
memory while driving. NOTICE ● Do not leave your portable player in the car. In particular mode CONNECTING A USB MEMORY 1 1 Open the cover and connect a USB memory. If a USB memory tag information exists, the file/folder names will be changed to track/album names. : Touch to start playing - 2013 Toyota Sequoia | Navigation Manual - Page 196
is removed and reinserted (and the contents have not been changed), the USB memory will resume playing from the same point it was last used. ● Depending on the USB memory that is connected to the system, certain functions may not be available. Touch the desired tab and select the desired folder - 2013 Toyota Sequoia | Navigation Manual - Page 197
1. AUDIO/VIDEO SYSTEM OPERATION "TUNE·SCROLL" knob: Turn the knob clockwise or counterclockwise to skip to the desired file/track. - 2013 Toyota Sequoia | Navigation Manual - Page 198
1. AUDIO/VIDEO SYSTEM OPERATION REPEATING The file or folder currently being listened to can be repeated. RANDOM ORDER Files or folders can be automatically and randomly selected. - 2013 Toyota Sequoia | Navigation Manual - Page 199
cover art that is saved in JPEG format can be displayed. ● When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume playing from the same point it was last used. ● Depending on the iPod that is connected to the system, certain functions may not be available - 2013 Toyota Sequoia | Navigation Manual - Page 200
1. AUDIO/VIDEO SYSTEM OPERATION SELECTING A PLAY MODE - 2013 Toyota Sequoia | Navigation Manual - Page 201
1. AUDIO/VIDEO SYSTEM OPERATION - 2013 Toyota Sequoia | Navigation Manual - Page 202
not support Bluetooth®, the Bluetooth® audio system will not function. CAUTION ● Do not operate the player's controls or connect to the Bluetooth® audio system while driving. may affect the operation of such devices. ● Before using cellular phones, users of any electrical medical device other than - 2013 Toyota Sequoia | Navigation Manual - Page 203
functions may be limited depending on ● Refer to http://www.toyota.com/Bluetooth/ to find using a Bluetooth® portable player in the following conditions: • The portable player is hiding from the display (behind a seat or in the glove box or console box). • The portable player touches or is covered - 2013 Toyota Sequoia | Navigation Manual - Page 204
selling or disposing of the vehicle, remove the Bluetooth® audio information from the system. (See "DELETING A Bluetooth® DEVICE" on page 158.) Canada CAUTION ● NOTE Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept - 2013 Toyota Sequoia | Navigation Manual - Page 205
the radiator and person's body (excluding extremities: hands, wrists, feet and ankles). Cet équipement se conforme aux limites d'exposition aux radiations établies par Industrie Canada pour un environnement non contrôlé ainsi qu'aux directives d'exposition aux fréquences radioélectriques (RF) émises - 2013 Toyota Sequoia | Navigation Manual - Page 206
(See page 162.) ● If connection fails once, a changing connection method confirmation screen is displayed. If connection fails 2 or the portable player manually. AUDIO/VIDEO SYSTEM 3 When the connection is completed, this screen is displayed. It is now possible to use the portable player. - 2013 Toyota Sequoia | Navigation Manual - Page 207
1. AUDIO/VIDEO SYSTEM OPERATION PLAYING Bluetooth® AUDIO PLAYING AND PAUSING Bluetooth® AUDIO SELECTING A DESIRED TRACK/FOLDER/ALBUM - 2013 Toyota Sequoia | Navigation Manual - Page 208
1. AUDIO/VIDEO SYSTEM OPERATION , : Touch to move the list up or down by 5 track/folder groups. If either of these screen buttons is touched when the top/bottom page of the list is displayed, the last/first page is displayed. "SEEK/TRACK" button: Press the " " or " " button of "SEEK/TRACK" to - 2013 Toyota Sequoia | Navigation Manual - Page 209
1. AUDIO/VIDEO SYSTEM OPERATION "TUNE·SCROLL" knob: Turn the knob clockwise or counterclockwise to quickly scroll up or down the track list. To select the desired track, press the knob. , : If appears to the right of an item name, the complete name is too long for the screen. Touch to scroll to the - 2013 Toyota Sequoia | Navigation Manual - Page 210
1. AUDIO/VIDEO SYSTEM OPERATION RANDOM ORDER Tracks or albums can be automatically and randomly selected. - 2013 Toyota Sequoia | Navigation Manual - Page 211
1. AUDIO/VIDEO SYSTEM OPERATION 11. REAR SEAT ENERTAINMAINT SYSTEM FEATURES The rear seat entertainment system is designed for the rear passengers to enjoy video such as Blu-ray Disc™ and DVD Disc separately from the front audio system. For details, refer to the vehicle owner's manual. 222 - 2013 Toyota Sequoia | Navigation Manual - Page 212
the switches on the steering wheel. DVD player Use the " " or " " switch to skip up or down to a different track, file or chapter in either direction. No. Switch Volume control switch " " switch To select a desired track, file or chapter: Quickly press and release the " " or " " switch until the - 2013 Toyota Sequoia | Navigation Manual - Page 213
1. AUDIO/VIDEO SYSTEM OPERATION "MODE" switch Press the "MODE" switch to select an audio mode. Each press changes the mode sequentially if the desired mode is ready to use. To turn the audio/video system on, press the "MODE" switch. Press and hold the "MODE" switch to mute/unmute or pause/resume - 2013 Toyota Sequoia | Navigation Manual - Page 214
into the disc slot. • The use of a cellular phone inside or limited range. The farther the vehicle is from a station, the weaker its signal will be. In addition, reception conditions change constantly as the vehicle moves. Here, some common reception problems that probably do not indicate a problem - 2013 Toyota Sequoia | Navigation Manual - Page 215
with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iPhone, working. On hot days, use the air conditioning system to cool the inside of the vehicle before using the player. Bumpy roads or other vibrations may make the - 2013 Toyota Sequoia | Navigation Manual - Page 216
outside the unit. Be sure to operate the player correctly. Special shaped discs DVD PLAYER Transparent/translucent discs Audio CDs DVD video discs 5 Use only discs marked as shown above. The following products may not be playable on your player: • SACD • dts CD • Copy-protected CD • DVD - 2013 Toyota Sequoia | Navigation Manual - Page 217
or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.) Remove discs from the players when not in use. Store them in their plastic cases away from moisture, heat and direct sunlight. To clean a disc: Wipe it with a soft, lintfree cloth that has been - 2013 Toyota Sequoia | Navigation Manual - Page 218
artist name in other formats. WMA files can contain a WMA tag that is used in the same way as an ID3 tag. WMA tags carry information such as track title and artist name. The emphasis function is available only when playing MP3/WMA files recorded at 32, 44.1 and 48 kHz. SAMPLING - 2013 Toyota Sequoia | Navigation Manual - Page 219
to 8 levels deep can be played. However, the start of playback may be delayed when using discs containing numerous levels of folders. For this reason, we recommend creating discs with no more files in the device. The order changes depending on the personal computer and MP3/WMA encoding software you - 2013 Toyota Sequoia | Navigation Manual - Page 220
of production, comments and other data. The contents can be freely edited using software with ID3 tag editing functions. Although the tags are restricted to a 8 and 9. 5 WMA TAG WMA files can contain a WMA tag that is used in the same way as an ID3 tag. WMA tags carry information such as track - 2013 Toyota Sequoia | Navigation Manual - Page 221
One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a non-exhaustive list of applicable Gracenote (collectively, "Gracenote Servers") and to perform other functions. You may use Gracenote Data only by means of the intended End-User functions of this - 2013 Toyota Sequoia | Navigation Manual - Page 222
, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, to delete data from the Gracenote Servers or to change data categories for any cause that Gracenote deems services at any time. GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED - 2013 Toyota Sequoia | Navigation Manual - Page 223
2. SETUP 1. AUDIO SETTINGS HD Radio™ SYSTEM SETTINGS HD Radio™ system can be set using the procedure outlined below. 4 Select the desired setting from "HD Radio/Analog Setting". 1 2 Press the "SETUP" button. Touch "Audio". Screen button "All" Function Touch to - 2013 Toyota Sequoia | Navigation Manual - Page 224
2. SETUP iPod SETTINGS iPod can be set using the procedure outlined below. 1 2 3 Press the "SETUP" button. Touch "Audio" on the "Setup" screen. Touch "iPod Settings". 4 Touch "Display Cover Art" and set it to "On" or "Off". 5 AUDIO/VIDEO SYSTEM 235 - 2013 Toyota Sequoia | Navigation Manual - Page 225
2. SETUP 236 - 2013 Toyota Sequoia | Navigation Manual - Page 226
switch to start the voice command system. To cancel voice recognition, press and hold the talk switch. Voice commands are marked with . Some commonly used commands are displayed on the screen. By saying "Next page" or "Previous page", or by touching "Next Pg."/"Prev. Pg.", the screen will display - 2013 Toyota Sequoia | Navigation Manual - Page 227
desired outcome is not shown, or if no selections are available, perform one of the following to return to the Voice Prompts" is touched. This setting can also be changed on the "Voice Settings" screen. (See page 48.) canceled by setting voice prompts to off. Use this setting when it is desirable to - 2013 Toyota Sequoia | Navigation Manual - Page 228
. • The air conditioning vents are turned towards the microphone. ● In the following conditions, the system may not recognize the command properly and using voice commands may not be possible: • The command is incorrect or unclear. Note that certain words, accents or speech patterns may be difficult - 2013 Toyota Sequoia | Navigation Manual - Page 229
. 6 VOICE COMMAND SYSTEM 3 Say "". Say the desired city name that belongs to the set state in the place of the "". Say "Change State" to change the set voice recognition state. 4 Say "". Say the desired full street name, or main body of the street name that belongs to - 2013 Toyota Sequoia | Navigation Manual - Page 230
using voice recognition is different from the set state in the "Address" screen (which was set when a destination was set manually), the set state in the "Address" screen will not change music, refer to the "AUDIO/VIDEO SYSTEM" section of this manual. 3 Say "Yes" or touch "Yes". The system starts - 2013 Toyota Sequoia | Navigation Manual - Page 231
connected, recognition data is created so tracks can be searched using voice commands. ● Recognition data is updated under the following conditions: • When the USB memory or iPod data has changed. • When the voice recognition language is changed. (See page 42.) ● While the recognition data is being - 2013 Toyota Sequoia | Navigation Manual - Page 232
How are my favorite teams doing? Stock quotes. How are my stocks doing? Let's check fuel prices. Find the cheapest gas prices. "Play Artist " "Play Album " "Traffic" ● The "Set a Destination", "Use the Phone", "Play Music" and "Get Information" commands displayed on the "Shortcut Menu - 2013 Toyota Sequoia | Navigation Manual - Page 233
Settings" screen enables voice command operation of the audio/video system. (See page 48.) For more information on operations that can be controlled using expanded voice commands, refer to "COMMAND LIST". (See page 246.) VOICE COMMAND EXAMPLE: TURN THE AUDIO SYSTEM ON 1 2 Press the talk switch - 2013 Toyota Sequoia | Navigation Manual - Page 234
Menu" screen. The functions available may vary according to the navigation system installed. Voice recognition language can be changed. (See "SELECTING A number. Shortcut Menu O O O ⎯ *1: For example; Gas stations, Restaurants, etc. *2: To use this function, say "Main menu" and then "Set a - 2013 Toyota Sequoia | Navigation Manual - Page 235
name in the place of the "". *2: To use this function, say "Main menu" and then "Play music" while the "Shortcut menu" screen is being displayed. "Get Information" Command "Traffic" "Weather" "Sports Scores" "Stock Quotes" "Fuel Prices" Action Displays the traffic incident list. Displays weather - 2013 Toyota Sequoia | Navigation Manual - Page 236
1. VOICE COMMAND SYSTEM OPERATION Select audio mode When Expanded Voice Commands are turned "On". (See page 245.) Command "Radio" "AM" "FM" "Satellite radio" "Disc" "Auxiliary" "Bluetooth* audio" "iPod" "USB audio" "Audio on" "Audio off" Action Sets the audio mode to radio. Selects the AM band. - 2013 Toyota Sequoia | Navigation Manual - Page 237
VERSION AND COVERAGE AREA MAP INFORMATION Coverage areas and legal information can be displayed and map data can be updated. INFORMATION ● Map data updates are available for a fee. Contact your Toyota dealer for further information. ● The "Map Information" screen displays the "Map Version" and "Map - 2013 Toyota Sequoia | Navigation Manual - Page 238
any interference, including interference that may cause undesired operation of the device. This Category II radiocommunication device complies with Industry Canada Standard RSS310. L'utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes: (1) il ne doit pas produire de - 2013 Toyota Sequoia | Navigation Manual - Page 239
subject to change. *: XM Sports and XM Stocks are included with an XM Satellite Radio subscription. AVAILABILITY OF SERVICE(S) The XM NavTraffic® service is available in the contiguous 48 U.S. states and Canada. The XM NavWeather™, XM Sports, XM Stocks and XM Fuel Prices services are available in - 2013 Toyota Sequoia | Navigation Manual - Page 240
3. XM FUNCTION OPERATION 1. XM Sports XM Sports is a service included with an XM Satellite Radio subscription. This service is also available with an XM TravelLink subscription. With this service, you can receive updates via the navigation system on your personally selected sports teams. RECEIVE - 2013 Toyota Sequoia | Navigation Manual - Page 241
screen. Touch "Options". Up to 5 teams can be added and saved in the system for which information will be received. The desired teams can be changed at any time. Teams must be added one at a time. 2 Touch the desired sporting league of the team. 4 Perform each setting according to the procedures - 2013 Toyota Sequoia | Navigation Manual - Page 242
3. XM FUNCTION OPERATION DELETE SPORTS TEAMS 1 Touch "Delete Sports Teams". 2 Touch the individual sports team to be deleted or touch "Select All" to delete all the teams, and touch "Delete". 3 Touch "Yes" to confirm or "No" to cancel. 7 INFORMATION 255 - 2013 Toyota Sequoia | Navigation Manual - Page 243
3. XM FUNCTION OPERATION 2. XM Stocks XM Stocks is a service included with an XM Satellite Radio subscription. This service is also available with an XM TravelLink subscription. With this service, you can receive updates via the navigation system on your personally selected stocks. RECEIVE STOCK - 2013 Toyota Sequoia | Navigation Manual - Page 244
3. XM FUNCTION OPERATION 4 Perform each setting according to the procedures outlined on the following pages. DELETE STOCKS 1 Touch "Delete Stocks". Personalized XM Stocks settings can also be input from the "Setup" screen. (See "XM SETTINGS" on page 267.) 2 Touch the individual stock to be - 2013 Toyota Sequoia | Navigation Manual - Page 245
3. XM Fuel Prices XM Fuel Prices is a service included with an XM TravelLink subscription. It enables the navigation system to display current fuel prices and gas station locations, which can be set as a destination if desired. XM Fuel Prices SCREEN SHOW XM Fuel Prices INFORMATION 1 Press - 2013 Toyota Sequoia | Navigation Manual - Page 246
station as a destination. "Detail": Touch to read the selected gas station's information. If is touched, the registered phone number can be called. INFORMATION Touch "Other". 7 INFORMATION 3 Touch "XM Fuel Prices". ● The information displayed is received via satellite radio. Depending on the - 2013 Toyota Sequoia | Navigation Manual - Page 247
Brand". 5 Touch the desired period. "Last 24 Hours", "Last 2 Days" or "Show All" can be selected. If "Show All" is selected, information about gas stations which fuel prices are not provided is also displayed on the list. 6 Touch "Save". 5 6 Touch the preferred brand. Touch "Save". 260 - 2013 Toyota Sequoia | Navigation Manual - Page 248
4. XM NavWeather™ The subscription-based XM ™ NavWeather service allows the navigation system to display weather information on the current position is displayed. Zoom in/out screen button The scale of the map can be changed. Three zoom levels can be selected; 16 miles (26 km), 30 miles (48 km) and - 2013 Toyota Sequoia | Navigation Manual - Page 249
icons and grids Inclement weather information is displayed on the map using weather icons and grids. Touching an icon shows the related after tomorrow's weather Other Observed time (Time elapsed since last update) Specified day's weather Hail storm Severe thunderstorm When the specified - 2013 Toyota Sequoia | Navigation Manual - Page 250
3. XM FUNCTION OPERATION No. Function Daytime weather Nighttime weather Maximum temperature Minimum temperature Precipitation probability XM NavWeather™ INDICATOR WEATHER WARNINGS Weather warnings issued within a radius of approximately 15 miles (25 km) or 7.8 miles (12.5 km) around the vehicle - 2013 Toyota Sequoia | Navigation Manual - Page 251
subscription-based XM ® NavTraffic service allows the navigation system to page 102.) Traffic Incident Warning: Traffic congestion information is provided using voice guidance. (See page 49.) Show Free Flowing Traffic: Freely route, or the road which the current vehicle is on. If a route has - 2013 Toyota Sequoia | Navigation Manual - Page 252
3. XM FUNCTION OPERATION 4 This screen is displayed. SHOW XM NavTraffic® INFORMATION 1 Touch "Show on Map". Guidance route traffic information is displayed on the screen. Touch "Detail" to display detailed traffic event information. 2 Touch "Traffic Information". The "Traffic Information" - 2013 Toyota Sequoia | Navigation Manual - Page 253
XM NavTraffic® information is received, the XM NavTraffic® indicator will appear on the screen. The color of the indicator changes depending on the traffic information received. Color White Function Traffic information has been received. Traffic restriction information on the guidance route has been - 2013 Toyota Sequoia | Navigation Manual - Page 254
4. SETUP 1. XM SETTINGS Used for changing settings for XM Sports, XM Stocks and XM Fuel Prices. 3 Touch the item to be set. 1 Press the "SETUP" button. On this screen, the following functions can be performed: No. Function Touch to set XM - 2013 Toyota Sequoia | Navigation Manual - Page 255
4. SETUP 268 - 2013 Toyota Sequoia | Navigation Manual - Page 256
ENTUNE-OVERVIEW 1. ENTUNE SERVICE*1 Entune is a service that enables the usable contents of a cellular phone to be displayed on and operated from the navigation screen. Before Entune can be used phone. Using the Entune application, ") Navigation system *1:Entune is available in the 48 states - 2013 Toyota Sequoia | Navigation Manual - Page 257
charged to renew the contract.* Services requiring a separate contract can also be used.* INITIALIZING PERSONAL DATA The personal data used in "Apps" can be details, refer to http:// www.toyota.com/entune/ or call 1-800331-4331. AVAILABILITY OF SERVICE Entune is available in the 48 states, D.C. and - 2013 Toyota Sequoia | Navigation Manual - Page 258
phone. 3 3 Register the cellular phone with the navigation system. In order to use Entune, the following settings must first be performed: User registration with the service contract (See page 272.) Download the Entune application onto your cellular phone, and login to the application. (See page - 2013 Toyota Sequoia | Navigation Manual - Page 259
2. ENTUNE OPERATION 1. ACTIVATING "APPS" Each time "Apps" is activated, the system checks for updates. When there are no updates available, the main menu screen will be displayed right after a screen indicating that updates are being checked for has been displayed. 4 Touch "Update". ACTIVATING " - 2013 Toyota Sequoia | Navigation Manual - Page 260
2. ENTUNE OPERATION 7 When updating is complete, the main menu screen will be displayed. The screen shown above is only an example. The actual screen may be different. For details about the function and service of each application displayed in the main menu, refer to http://www.toyota.com/ entune - 2013 Toyota Sequoia | Navigation Manual - Page 261
is unavailable while transferring contacts." "There is a problem with the Bluetooth* connection. For troubleshooting assistance, please visit toyota.com or call 1-800-3314331." "This feature is unavailable during a handsfree call." "To use the services, an active application needs to be running on - 2013 Toyota Sequoia | Navigation Manual - Page 262
details about the function and service of each application displayed in the main menu, refer to http://www.toyota.com/ entune/. 2 Touch "Apps". INFORMATION ● Some parts of "Apps" can be adjusted using the switches on the steering wheel. 3 A screen indicating that updates are being checked for - 2013 Toyota Sequoia | Navigation Manual - Page 263
2. ENTUNE OPERATION SETTING A DESTINATION USING "APPS" Locations that were searched using "Apps" can be set as a destination. MAKING A PHONE CALL USING "APPS" Phone calls can be made to locations which were searched using "Apps". 1 Touch "Map". 1 Touch "Call". 2 Touch "Go to ". 2 Touch " - 2013 Toyota Sequoia | Navigation Manual - Page 264
function. The keyboard layout can be changed. (See page 43.) For details on operating the keyboard, see "INPUTTING LETTERS AND NUMBERS/LIST SCREEN OPERATION" on page 28. INPUTTING A KEYWORD USING THE SOFTWARE KEYBOARD INPUTTING A KEYWORD USING THE VOICE RECOGNITION FUNCTION Voice recognition is - 2013 Toyota Sequoia | Navigation Manual - Page 265
2. ENTUNE OPERATION 3 Search results will be displayed on the screen. The screen shown above is only an example. The actual screen may be different. 8 APPS 279 - 2013 Toyota Sequoia | Navigation Manual - Page 266
2. ENTUNE OPERATION 280 - 2013 Toyota Sequoia | Navigation Manual - Page 267
driver by displaying an image of the view behind the vehicle with fixed guide lines on the screen while backing up, for example while parking. INFORMATION DRIVING The instructions given are only guidelines. When and how much to turn the steering wheel will vary according to traffic conditions, road - 2013 Toyota Sequoia | Navigation Manual - Page 268
sure to visually check all around the vehicle both directly and using the mirrors before proceeding. ● If the tire sizes are changed, the position of the fixed guide lines displayed on the screen may change. ● The camera uses a special lens. The distances between objects and pedestrians that appear - 2013 Toyota Sequoia | Navigation Manual - Page 269
position of the fixed guide lines displayed on the screen may change in accordance with the number of passengers, the amount of cargo etc. Be sure to visually check all around the vehicle both directly and using the mirrors before proceeding. ● The vehicle width extension guide lines are wider than - 2013 Toyota Sequoia | Navigation Manual - Page 270
1. REAR VIEW MONITOR SYSTEM CANCELING REAR VIEW MONITOR SYSTEM The rear view monitor system is cancelled when the shift lever is shifted into any position other than the "R" position. When the shift lever is shifted to the "R" position and any mode button (such as "MAP/VOICE") is pressed The rear - 2013 Toyota Sequoia | Navigation Manual - Page 271
for the rear view monitor system is located as shown in the illustration. Screen USING THE CAMERA If the camera lens becomes dirty, it cannot transmit a clear of the bumper or under the bumper cannot be displayed. ● The camera uses a special lens. The distance of the image that appears on the - 2013 Toyota Sequoia | Navigation Manual - Page 272
and mounting angle of the camera may change. • As the camera has a • Do not allow organic solvent, car wax, window cleaner or glass coat to Toyota dealer as soon as possible. DIFFERENCES BETWEEN THE SCREEN AND THE ACTUAL ROAD The distance guide lines and the vehicle width extension guide - 2013 Toyota Sequoia | Navigation Manual - Page 273
the same way, there will be a margin of error between the guidelines and the actual distance/ course on the road. WHEN THE GROUND BEHIND THE VEHICLE SLOPES DOWN SHARPLY The distance guide lines will appear to be further from the vehicle than the actual distance. Because of this, objects will appear - 2013 Toyota Sequoia | Navigation Manual - Page 274
lines are displayed according to flat surfaced objects (such as the road). It is not possible to determine the position of three-dimensional objects (such as vehicles) using the distance guide lines. When approaching a three-dimensional object that extends outward (such as the flatbed of a truck - 2013 Toyota Sequoia | Navigation Manual - Page 275
1. REAR VIEW MONITOR SYSTEM DISTANCE GUIDE LINES Visually check the surroundings and the area behind the vehicle. On the screen, it appears that a truck is parking at point B. However, in reality - 2013 Toyota Sequoia | Navigation Manual - Page 276
vehicle's surroundings. (Use the monitor again once conditions have been improved.) The procedure for adjusting the picture quality of the vehicle inspected by your Toyota dealer. Have the vehicle inspected by your Toyota dealer. The image is out of alignment The fixed guide lines are very far out - 2013 Toyota Sequoia | Navigation Manual - Page 277
1. REAR VIEW MONITOR SYSTEM 292 - 2013 Toyota Sequoia | Navigation Manual - Page 278
information and updates This system uses the maps of DENSO. END USER LICENSE AGREEMENT PLEASE READ THIS AGREEMENT CAREFULLY BEFORE USING THE the prior written consent of TANA and its licensors. LIMITATIONS ON USE The DATABASE is restricted for use in the specific system for which it was created. - 2013 Toyota Sequoia | Navigation Manual - Page 279
, WITHOUT LIMITATION, LOST PROFITS OR COSTS OF COVER, LOSS OF USE OR BUSINESS INTERRUPTION OR THE LIKE, REGARDLESS OF WHETHER THE PARTY WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL THE TOTAL LIABILITY OF DENSO OR TANA (OR THEIR LICENSORS OR SUPPLIERS) EXCEED THE AMOUNTS PAID BY - 2013 Toyota Sequoia | Navigation Manual - Page 280
in whole or in part by the United States Government, then use, duplication, reproduction, release, modification, disclosure or transfer of this commercial product and accompanying documentation, is restricted in accordance with the LIMITED or RESTRICTED rights as described in DFARS 252.227-7014 - 2013 Toyota Sequoia | Navigation Manual - Page 281
® 2009*. Prices are not established, controlled or approved by the United States Postal Service®. The following trademarks and registrations are owned by the USPS: United States Postal Service, USPS, and ZIP+4. *original publication date TERMS AND CONDITIONS Personal Use Only. You agree to use this - 2013 Toyota Sequoia | Navigation Manual - Page 282
information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic data including but not limited to, content, quality, accuracy, completeness, effectiveness, reliability, fitness for a particular purpose, usefulness, use or results to - 2013 Toyota Sequoia | Navigation Manual - Page 283
, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Officer, federal government agency - 2013 Toyota Sequoia | Navigation Manual - Page 284
Infogroup POI Data shall be retained by Infogroup. 2. Limitations on use Except to the extent explicitly permitted by mandatory laws, USE OF THE POI DATA. END USER LICENSE AGREEMENT Personal Use Only. You agree to use this information for solely personal, non-commercial purposes, and not for service - 2013 Toyota Sequoia | Navigation Manual - Page 285
harmless from and against any liability, loss, injury (including injuries resulting in death), demand, action, cost, expense, or claim of any kind or character, including but not limited to attorney's fees, arising out of or in connection with any use or possession by you of this information. 307 - 2013 Toyota Sequoia | Navigation Manual - Page 286
END USER NOTICE The marks of companies displayed by this product to indicate business locations are the marks of their respective owners. The use of such marks in this product does not imply any sponsorship, approval, or endorsement by such companies of this product. 308 - 2013 Toyota Sequoia | Navigation Manual - Page 287
to Berkeley by the Systems Programming Group of the University of Utah Computer Science Department and Ralph Campbell. · T-Kernel This Product uses the Source Code of T-Kernel under T-License granted by the T-Engine Forum (www.t-engine.org). · C Library This product includes software developed - 2013 Toyota Sequoia | Navigation Manual - Page 288
Copyright © 1988, 1993 The Regents of the University of California. All rights reserved. Copyright © 1988, 1993 The Regents of the University of California. All rights reserved. This code is derived from software contributed to Berkeley by Arthur David Olson of the National Cancer Institute. - 2013 Toyota Sequoia | Navigation Manual - Page 289
contributed to Berkeley. All advertising materials mentioning features or use of this software must display the following acknowledgement: This to Berkeley by Andrew Hume of AT&T Bell Laboratories. Redistribution and use in source and binary forms, with or without modification, are permitted - 2013 Toyota Sequoia | Navigation Manual - Page 290
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - 2013 Toyota Sequoia | Navigation Manual - Page 291
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - 2013 Toyota Sequoia | Navigation Manual - Page 292
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - 2013 Toyota Sequoia | Navigation Manual - Page 293
This product includes software developed by the NetBSD Foundation, Inc. and its contributors. Copyright © 1996 The NetBSD Foundation, Inc. All rights reserved. This code is derived from software contributed to The NetBSD Foundation by J.T. Conklin. Copyright © 1997 The NetBSD Foundation, Inc. All - 2013 Toyota Sequoia | Navigation Manual - Page 294
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - 2013 Toyota Sequoia | Navigation Manual - Page 295
AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT - 2013 Toyota Sequoia | Navigation Manual - Page 296
AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT - 2013 Toyota Sequoia | Navigation Manual - Page 297
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - 2013 Toyota Sequoia | Navigation Manual - Page 298
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS and that both notices appear in supporting documentation. CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS ""AS Carnegie the rights to redistribute these changes. · TCP/IP, Socket Library - 2013 Toyota Sequoia | Navigation Manual - Page 299
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - 2013 Toyota Sequoia | Navigation Manual - Page 300
that the above copyright notice and this permission notice appear in all copies, and that the name of Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the document or software without specific, written prior permission. THE SOFTWARE IS PROVIDED ""AS - 2013 Toyota Sequoia | Navigation Manual - Page 301
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - 2013 Toyota Sequoia | Navigation Manual - Page 302
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - 2013 Toyota Sequoia | Navigation Manual - Page 303
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. Rights, responsibilities and use of this and this permission notice appear in supporting documentation, and that the name of CMU not be used in advertising or publicity pertaining to - 2013 Toyota Sequoia | Navigation Manual - Page 304
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - 2013 Toyota Sequoia | Navigation Manual - Page 305
with Netscapes SSL. This library is free for commercial and noncommercial use as long as the following conditions are aheared to. The following just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh - 2013 Toyota Sequoia | Navigation Manual - Page 306
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed