3Com 3C905-TX Installation Guide - Page 8
Connecting to the Network - 10 100
View all 3Com 3C905-TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide Connecting to the Network 7 Secure the card by replacing the slot cover screw or the retaining bracket and its screw, as appropriate. 8 Replace the cover. Reconnect the power cord and any connection to a telecommunications network. Connecting to the Network Connect the network cable to the RJ-45 UTP (Unshielded Twisted Pair) LAN connector. The LAN card supports both 10 Mbits/s and 100 Mbits/s operation. RJ-45 UTP Connector Remote Wake-Up The network interface card is able to wake the PC from a sleep state if it receives a special sequence (known as a Magic PacketTM) from the network. 8 English
HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Connecting to the Network
8
English
7
Secure the card by replacing the slot cover screw or the retaining
bracket and its screw, as appropriate.
8
Replace the cover. Reconnect the power cord and any connection to
a telecommunications network.
Connecting to the Network
Connect the network cable to the RJ-45 UTP (Unshielded Twisted
Pair) LAN connector. The LAN card supports both 10 Mbits/s and 100
Mbits/s operation.
Remote Wake-Up
The network interface card is able to wake the PC from a sleep state if
it receives a special sequence (known as a Magic Packet
TM
) from the
network.
RJ-45 UTP
Connector