3Com 3CDSG8-US User Guide - Page 9
System Specifications, Label, Status, Description, Specification - weight
UPC - 662705533162
View all 3Com 3CDSG8-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Getting Started 9 LED Power System Label Power System SFP Module Active Module Active 10/100/1000 BASE- Port Status T Ethernet Port Status SFP Ethernet Port Status Duplex Mode Port Status 8/SFP Duplex Status Green OFF Green Yellow Green OFF Green Yellow OFF Green OFF Yellow OFF Description The power adapter is providing power to the switch The power adapter is not connected correctly or has failed. The switch is operating normally. Flashes green when the switch is performing power-on self test (POST) or upgrading firmware. The switch has failed POST or the software image is corrupt. Consult troubleshooting section. The SFP module is inserted and recognised. The SFP module is inserted without link, no SFP module is inserted or the SFP module is not recognized The port is connected at 1000Mbps. The LED flashed when traffic is transmitted or received. The port is connected at 10 or 100Mbps. The LED flashed when traffic is transmitted or received. The port is not connected The SFP module has a valid link. The LED flashed when traffic is transmitted or received. The SFP Module has no link. The port is in full duplex The port is not connected, or is connected at half duplex. System Specifications Table 3 contains the system specifications of the OfficeConnect Managed Gigabit series switch. Table 3 System specifications of the Switch OfficeConnect Managed Gigabit series switch Specification Switch OfficeConnect Managed Gigabit 3CDSG8 Physical dimensions 225 x 135 x 27 mm (8.9 x 5.3 x 1.06 in.) Weight (Unpackaged) 0.57 kg (1.25 lb) Console port One RJ-45 Console port Gigabit Ethernet ports 8 × 10/100/1000 Mbps Ethernet ports including one shared dual personality Gigabit SFP port DC Input voltage Power consumption Operating temperature Relative humidity Rated voltage range: 12V DC, 1A maximum 23.9 BTU/hr (7.6 Watts) 0 to 40 °C (32 to 113 °F) 10 to 90% non-condensing Additional specifications can be found in Chapter 14 "Device Specifications and Features"