AIWA CDS-TD66 Operating Instructions - Page 7
Specifications - 16
View all AIWA CDS-TD66 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
c PLAY s STOP 0-9, +10 REPEAT a PAUSE r, t SKIP/SEARCH (CSD-TD66 only) PROGRAMMED PLAY Up to 30 tracks can be programmed from the disc. 1 In stop mode, keep * s STOP/MEMORY pressed until "M" flashes in the display. * or s on the remote control (CSD-TD66 only) 2 Press r, t to select a track, then press s STOP/MEMORY to store it. Track number Programmed number To select a track with the remote control (CSDTD66 only) Press the numbered buttons 0-9 and +10. 3 Repeat step 2 to program other tracks. 4 Keep s STOP/MEMORY pressed until "M" stops flashing to finish the program. "M" remains displayed and indicates the unit stores the programmed tracks. 5 Press e to start play. To check the program, press r or t in stop mode. To clear the program, press s once in stop mode so that "M" disappears in the display. To change the programmed tracks, clear the program and repeat all the steps again. Specifications Tuner section Frequency range, antenna - FM: 87.5 - 108.0 MHz Rod antenna, AM: 530/531 - 1,710/1,602 kHz (10/9 kHz step) Ferrite bar antenna Deck section Track format - 4 tracks, 2 channels / Frequency range - Normal tape: 50 - 12,500 Hz (EIAJ) / Recording system - AC bias / Erasing system - Magnet erase / Heads - Recording/playback head (1), Erasure head (1) CD player section Disc - Compact disc / Scanning method - Noncontact optical scanner (semiconductor laser) General Speaker - 100 mm cone type (2) / Output - Headphones jack (stereo mini-jack) / Power output - 2.5 W + 2.5 W (EIAJ 7 ohms, T.H.D. 10% DC) / Power requirements - DC 12 V using eight size C (R14) batteries, AC 120 V, 60 Hz / Power consumption - 15 W / Dimensions (W × H × D) - 414 × 183 × 235 mm (16 3/8 × 7 1/4 × 9 3/8 in.) / Weight (excluding batteries) - 3.2 kg (7 lbs. 1 oz.) / Accessory - Remote control (1, CSD-TD66 only), AC cord (1) Specifications and external appearance are subject to change without notice. En COPYRIGHT Please check the copyright laws relating to recordings from disc, radio or external tape for the country in which the machine is being used. If an erroneous display or malfunction occurs Make sure that none of the deck operation buttons is pressed. Press s while pressing TAPE/POWER/6STANDBY. If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display. Leave the unit for a while and turn the power back on. ENGLISH 7