AIWA JAX-S77 Operating Instructions - Page 14

Tuner Presetting radio stations You can preset the following number of stations: - 2 band model: 20 FM stations and 10 AM stations. - 3 band model: 20 FM stations, 10 MW stations and 10 SW stations. You can then tune in any of those stations simply by selecting the corresponding preset number. Automatic tuning preset You can automatically tune in all of the stations that can be received in your area and then store the radio frequency of the desired stations. 1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner. 2 Press TUNER BAND repeatedly until the desired band appears in the display. The bands you can receive vary depending on the model you purchased. Be sure to check which bands you can receive. Every time you press the button, the band changes cyclically as follows: 2 band model: FM y AM 3 band model: FM t MW t SW 3 Press TUNING MODE repeatedly until "AUTO" appears in the display. 4 Press - or + (or turn TUNING operation dial on the unit). The frequency changes as the system scans for a station. Scanning stops automatically when a station is tuned in. At that time, "TUNED" and "STEREO" (for an FM stereo program) appear. If "TUNED" does not appear and the scanning does not stop Set the frequency of the desired radio station as described in steps 3 through 8 of "Manual tuning preset" (page 15). 5 Press TUNER MEMORY. A preset number appears. Preset number 6 Press - or + (or turn TUNING operation dial on the unit) repeatedly to select the desired preset number. 7 Press ENTER. 8 Repeat steps 2 through 7 to store other stations. 14GB