AIWA JAX-S77 Operating Instructions - Page 20

To record a disc by specifying track order You can record only your favorite CD tracks using Program Play. Between steps 3 and 4, perform steps 2 to 6 of "Creating your own program" (page 13). Tip For JAX-N88/N77/N66/N33/PK88/PK77/PK66, if you select both sides recording and the tape reaches the end of the front side part-way through a track, the entire track is recorded again from the beginning of the reverse side. Recording on a tape manually - Manual Recording You can record just the portions you like from a CD, tape or radio program on a tape. You can also record from connected components (see "Hooking up optional components" on page 27). Use buttons on the unit for the operation. 1 Load a recordable tape into deck B, then press TAPE A/B repeatedly to select deck B. 2 (JAX-N88/N77/N66/N33/PK88/PK77/ PK66 only) Press PLAY MODE repeatedly to select "g" to record on one side. Select "j" (or "RELAY") to record on both sides. When you want to record from the reverse side, press hH twice or until the TAPE B reverse side indicator lights up. Then press x. 3 Press one of the following buttons to select the desired source to record. • CD: To record from this system's CD player. • TAPE A/B: To record from this system's tape deck A. • TUNER/BAND: To record from this system's tuner. • VIDEO/MD: To record from the connected VCR or MD deck to VIDEO/ MD IN jacks. 4 Press REC PAUSE/START. Deck B stands by for recording. "REC" flashes. 5 Press REC PAUSE/START, then start playing the desired source to record. Recording starts. 20GB