ASRock 775XFire-RAID User Manual - Page 21

Step 3. Install the standard Radeon (CrossFireTM Ready) graphics card to AGI Express slot (PCI Express x 4). For the proper installation procedures, please refer to section "Expansion Slots". Standard Radeon (CrossFireTM Ready) s graphics card r e Step 4. Install the Radeon CrossFireTM Edition graphics card to PCI Express x 16 slot. For the proper installation procedures, please refer to section "Expan- sion Slots". Radeon CrossFireTM Edition graphics card Standard Radeon (CrossFireTM Ready) graphics card You are allowed to install two CrossFireTM Edition graphics cards to both slots, or you may use one CrossFireTM Edition graphics cards and a compatible standard Radeon (CrossFireTM Ready) graphics card from the same series. Step 5. Correctly connect the DVI-DMS cable to the monitor connector and two graphics cards that you install. (If you install two standard Radeon (CrossFireTM Ready) graphics cards to this motherboard, please skip this step.) DVI-DMS cable DMS connector DVI connector P Standard Radeon (CrossFireTM Ready) graphics card DVI connector Connect the DVI-DMS cable to DVI connector of the compatible standard Radeon (CrossFireTM Ready) graphics card. There are two DVI connectors on the standard Radeon (CrossFireTM Ready) graphics card. Please connect the DVI-DMS cable to the correct DVI connector; otherwise , the graphics card will not work. 21