ASRock 960GM-VGS3 FX Quick Installation Guide - Page 3

I/O Panel 1 2 3 4 5 9 8 1 PS/2 Mouse Port (Green) * 2 LAN RJ-45 Port 3 Line In (Light Blue) ** 4 Front Speaker (Lime) 5 Microphone (Pink) 7 6 6 VGA Port (VGA1) 7 USB 2.0 Port (USB23) 8 USB 2.0 Ports (USB01) 9 PS/2 Keyboard Port (Purple) * There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications Activity/Link LED SPEED LED Status Description Status Description ACT/LINK SPEED LED LED Off No Link 960GM-VGS3 FX: Blinking Data Activity Off 10Mbps connection On Link Orange 100Mbps connection Green 1Gbps connection LAN Port 960GM-VS3 FX: Off 10Mbps connection Orange 100Mbps connection ** To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. Please refer to below steps for the software setting of Multi-Streaming. For Windows® XP: After restarting your computer, you will find "Mixer" tool on your system. Please select "Mixer ToolBox" , click "Enable playback multi-streaming", and click "ok". Choose "2CH" or "4CH" and then you are allowed to select "Realtek HDA Primary output" to use Rear Speaker and Front Speaker, or select "Realtek HDA Audio 2nd output" to use front panel audio. Then reboot your system. For Windows® 8 / 7 / VistaTM: After restarting your computer, please double-click "Realtek HD Audio Manager" on the system tray. Set "Speaker Configuration" to "Quadraphonic" or "Stereo". Click "Device advanced settings", choose "Make front and rear output devices playbacks two different audio streams simultaneously", and click "ok". Then reboot your system. 3 ASRock 960GM-VGS3 FX / 960GM-VS3 FX Motherboard English