ASRock ALiveXFire-eSATA2 R3.0 User Manual - Page 32
data cable first, and then connect the orange SATAII connector
View all ASRock ALiveXFire-eSATA2 R3.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Connect the SATA data cable to the red SATAII connector (SATAII_RED (PORT 1)) Connect the SATA data cable to the red eSATAII connector (eSATAII_BOTTOM) 2. If you plan to install two eSATAII devices to this motherboard, you need to enable both the top and the bottom eSATAII ports of the I/O shield. In order to enable the top and the bottom eSATAII ports of the I/O shield, you have to connect the red SATAII connector (SATAII_RED (PORT 1); see p.10 No.15) and the red eSATAII connector (eSATAII_BOTTOM; see p.10 No.36) with a SATA data cable first, and then connect the orange SATAII connector (SATAII_ORANGE (PORT 2); see p.10 No.14) and the orange eSATAII connector (eSATAII_TOP; see p.10 No.35) with another SATA data cable. After that, both the top and the bottom eSATAII ports of the I/O shield are enabled. Connect the SATA data cables to both red SATAII connector (SATAII_RED (PORT 1)) and orange SATAII connector (SATAII_ ORANGE (PORT 2)) Connect the SATA data cables to both red eSATAII connector (eSATAII_BOTTOM) and orange eSATAII connector (eSATAII_TOP) Please make sure to correctly connect the SATAII and eSATAII connectors with corresponding color so that the eSATAII function will work successfully. 32