ASRock B75M R2.0 Quick Installation Guide - Page 32
XP / XP 64-bit Without RAID Functions
View all ASRock B75M R2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
ATX 12V Power Connector (4-pin ATX12V1) (see p.2, No. 2) Serial port Header (9-pin COM1) (see p.2, No. 25) Please connect an ATX 12V power supply to this connector. This COM1 header supports a serial port module. Chassis Intrusion Header (2-pin CI1) (see p.2, No. 27) 1 GND Signal This motherboard supports CASE OPEN detection feature that detects if the chassis cover has been removed. This feature requires a chassis with chassis intrusion detection design. 2.12 Driver Installation Guide To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from top to bottom to install those required drivers. Therefore, the drivers you install can work properly. 2.13 Installing Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP 64-bit Without RAID Functions If you want to install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP 64-bit OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow the procedures below according to the OS you install. 2.13.1 Installing Windows® XP / XP 64-bit Without RAID Functions If you want to install Windows® XP / XP 64-bit OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow the steps below. AHCI mode is not supported under Windows® XP / XP 64-bit. English 32 ASRock B75M R2.0 Motherboard