ASRock K7S8XE User Manual - Page 11

Expansion Slots PCI and AGP Slots, Installing an expansion card - + motherboard

Get ASRock K7S8XE PDF manuals and user guides View all ASRock K7S8XE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

2.6 Expansion Slots (PCI and AGP Slots) There are 6 PCI slots and 1 AGP slot on K7S8XE motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. AGP slot: The AGP slot is used to install a graphics card. The ASRock AGP slot has a special locking mechanism which can securely fasten the graphics card inserted. Please do not use 3.3V AGP card on K7S8XE's AGP slot! It may cause permanent damage! Installing an expansion card Step 1. Before installing the expansion card, read the documentation of the expansion card and make necessary hardware settings for the card. Step 2. Remove the system unit cover (if your motherboard is already installed in a chassis). Step 3. Remove the bracket facing the slot that you intend to use. Keep the screws for later use. Step 4. Align the card connector with the slot and press firmly until the card is completely seated on the slot. Step 5. Fasten the card to the chassis with screws. Step 6. Replace the system cover. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
11
2.6 Expansion Slots (PCI and AGP Slots)
There are 6 PCI slots and 1 AGP slot on K7S8XE motherboard.
PCI slots:
PCI slots are used to install expansion cards that have the 32-bit PCI
interface.
AGP slot:
The AGP slot is used to install a graphics card.
The ASRock AGP slot has a special locking mechanism which can
securely fasten the graphics card inserted.
Please do not use 3.3V AGP card on K7S8XE’s AGP slot!
It may cause permanent damage!
Installing an expansion card
Step 1.
Before installing the expansion card, read the documentation of the
expansion card and make necessary hardware settings for the card.
Step 2.
Remove the system unit cover (if your motherboard is already installed in a
chassis).
Step 3.
Remove the bracket facing the slot that you intend to use.
Keep the screws
for later use.
Step 4.
Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
Step 5.
Fasten the card to the chassis with screws.
Step 6.
Replace the system cover.