ASRock K7S8XE User Manual - Page 22
Resource Configuration, PCI Latency Timer PCI Clocks, Primary Graphics Adapter, AGP Data Rate, AGP
View all ASRock K7S8XE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Resource Configuration: Advanced AMIBIOS SETUP UTILITY - VERSION 3.31a Resource Configuration [ Setup Help ] PCI Latency Timer (PCI Clocks) Primary Graphics Adapter AGP Data Rate AGP Fast Write 32 PCI Auto Enabled to select PCI clocks. Leave on default setting for the best PCI performance. F1:Help Esc:Previous Menu :Select Item +/-:Change Values Enter:Select Sub-Menu F9:Setup Defaults F10:Save & Exit PCI Latency Timer (PCI Clocks): The default is 32. It is recommended to keep the default value unless the installed PCI expansion cards' specifications require other settings. Primary Graphics Adapter: Select PCI or AGP as the primary graphics adapter. AGP Data Rate: The default setting is [Auto]. You may select between [8X] or [4X] for an AGP 3.0 card, or select among [4X], [2X], [1X] for an AGP 2.0 card. AGP Fast Write: This allows you to enable or disable the feature of AGP fast write protocol support. Peripheral Configuration: Advanced AMIBIOS SETUP UTILITY - VERSION 3.31a Peripheral Configuration [ Setup Help ] OnBoard FDC OnBoard Serial Port OnBoard Infrared Port OnBoard Parallel Port Parallel Port Mode EPP Version Parallel Port IRQ Parallel Port DMA Channel OnBoard Midi Port Midi IRQ Select OnBoard Game Port OnBoard IDE OnBoard LAN OnBoard AC' 97 Audio Auto Auto Enabled Auto Normal N/A Auto N/A Disabled 5 Disabled Disabled Disabled Disabled to enable or disable the floppy drive controller. F1:Help Esc:Previous Menu :Select Item +/-:Change Values Enter:Select Sub-Menu F9:Setup Defaults F10:Save & Exit 22