ASRock K8A780LM User Manual - Page 38
Processor Multiplier, Processor Voltage, HT Bus Speed, HT Bus Width, CPU Thermal Throttle, Memory
View all ASRock K8A780LM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit CPU Configuration Overclock Mode CPU Frequency (MHz) PCIE Frequency (MHz) Spread Spectrum Boot Failure Guard Processor Maximum Multiplier Processor Maximum Voltage Multiplier/Voltage Change Processor Multiplier Processor Voltage HT Bus Speed HT Bus Width CPU Thermal Throttle Memory Configuration [Auto] [200] [100] [Auto] [Enabled] x11 2200 MHZ 1.450 V [Manual] [x11 2200 MHZ] [1.400 V] [Auto] [Auto] [Auto] Overclocking may cause damage to your CPU and motherboard. It should be done at your own risk and expense. Select Screen Select Item Enter Go to Sub Screen F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc. Processor Multiplier This item will show when "Multiplier/Voltage Change" is set to [Manual]; otherwise, it will be hidden. The range of the value depends on the CPU you adopt on this motherboard. However, for system stability, it is not recommended to adjust the value of this item. Processor Voltage This item will show when "Multiplier/Voltage Change" is set to [Manual]; otherwise, it will be hidden. The range of the value depends on the CPU you adopt on this motherboard. However, for safety and system stability, it is not recommended to adjust the value of this item. HT Bus Speed This feature allows you selecting Hyper-Transport bus speed. Configuration options: [Auto], [200 MHz], [400 MHz], [600 MHz], [800 MHz] and [1000 MHz]. The configuration options depend on the CPU you adopt. HT Bus Width This feature allows you selecting Hyper-Transport bus width. Configuration options: [Auto], [8 Bit] and [16 Bit]. CPU Thermal Throttle Use this to enable CPU internal thermal control mechanism to keep the CPU from overheated. Configuration options: [Disabled], [Auto], [12.5%], [25%], [37.5%], [50%], [62.5%], [75%] and [87.5%]. The default value is [Auto]. Memory Configuration Memory Clock This item can be set by the code using [Auto]. You can set one of the standard values as listed: [133MHz DDR_266], [166MHz DDR_333)] and [200MHz DDR_400]. DRAM Voltage Use this to select DRAM voltage. Configuration options: [Auto], [2.60V] to [2.95V]. The default value is [Auto]. 38