ASRock P43DE3 User Manual - Page 51

EUP Support Use this item to enable or disable EuP. The default value is [Auto]. ACPI HPET Table Use this item to enable or disable ACPI HPET Table. The default value is [Disabled]. Please set this option to [Enabled] if you plan to use this motherboard to submit Windows® VistaTM certification. 3.4.4 Storage Configuration BIOS SETUP UTILITY Advanced Storage Configuration SATAII Configuration Configure SATAII as OnBoard IDE Controller SATAII 1 SATAII 2 SATAII 3 SATAII 4 SATAII 5 SATAII 6 IDE1 Master IDE1 Slave AHCI CD/DVD Boot Time out [Enhanced] [IDE] [Enabled] [Hard Disk] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [35] Options Disabled Compatible Enhanced +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. SATAII Configuration Please select [Compatible] when you install legacy OS. If native OS (Windows® 2000 / XP / VistaTM) is installed, please select [Enhanced]. Then in the option "Configure SATAII as", you are allowed to set the selection to [IDE] or [AHCI]. The default value is [IDE]. If you select [AHCI] mode, the options "Hot Plug" and "SATA Link Power Management" will appear. Configuration options: [Enabled] and [Disabled]. The default value is [Enabled]. AHCI (Advanced Host Controller Interface) supports NCQ and other new features that will improve SATA disk performance but IDE mode does not have these advantages. OnBoard IDE Controller Use this item to enable or disable onboard IDE controller. The default value is [Enabled]. IDE Device Configuration You may set the IDE configuration for the device that you specify. We will use the "Primary IDE Master" as the example in the following instruction. 51