Acer AL2002 AL2002 Service Guide - Page 2

Important Safety Notice ACER AL2002W 1 Go to cover page Product Anouncement: This product is certificated to meet RoHS Directive and Lead-Free produced definition. Using approved critical components only is recommended when the situation to replace defective parts. Vender assumes no liability express or implied, arising out of any unauthorized modification of design or replacing non-RoHS parts. Service providers assume all liability. Qualified Repairability: Proper service and repair is important to the safe, reliable operation of all series products. The service providers recommended by vender should being aware of notices listed in this service manual in order to minimize the risk of personal injury when perform service procedures. Furtermore, the possibile existed improper repairing method may damage equipment or products. It is recommended that service engineers should have repairing knowledge, experience, as well as appropriate product training per new model before performing the service procedures. NOTICE: à To avoid electrical shocks, the products should be connect to an authorized power cord, and turn off the master power switch each time before removing theAC power cord. à To prevent the product away from water or explosed in extremely high humility environment. à To ensure the continued reliability of this product, use only original manufacturer's specified parts. à To ensure following safty repairing behavior, put the replaced part on the components side of PWBA, not solder side. à To ensure using a proper screwdriver, follow the torque/force listed in assembly and disassembly à procedures to unscrew screws. à Using Lead-Free solder to well mounted the parts. à The fusion point of Lead-Free solder requested in the degree of 220°C.