Acer AL2002 AL2002 Service Guide - Page 36

12 Separate LCD panel module and Bracket Chassis module apart S16 Lift the Bracket Chassis module up and put it aside. - - 13 Panel inspection S17 Put a panel on a protective cushion and exame the surface see if has any unexpect dust or scratch. 6814202010P24 LCD_20"_M201EW02 V1(LTC)_AUO S18 Turn over the panel that metal side is faced up. - - Disassemble the Interface Board 14 and the Bracket Chassis Base S19 Use a cross-head screwdriver unscrewed the No.1~4 screws. with 4 screws - - 15 Disassemble the Power Board with 4 screws S20 Use a cross-head screwdriver unscrewed the No.1~4 screws. Disassembe the Power Board 16 and Interface Board to Bracket Chassis Base S21 Disconnect the FFC cable and P802 to the Interface Board. 7116240081P0A SCREW-MACHINE-Star Washer-Pan-M4-8-Zn 7111230061P SCREW-MACHINE-Flat Washer-Pan-M3-6-Zn 6712300044PC0 HARNESS_FFC_30P(1.0)_220_20696_P-TWO 6711100005P90 HARNESS_10P_140mm_1007#24_ETC 5114300811P T20BAUW-G_LITEON_POWER BD 5113301834P T20BNUW-G1_ACER_INTERFACE BD 7737816290P0A BRACKET ASSY_CHASSIS_ACER T20BNUW_SGCC - - Panel Lamp cables 1 Refer to LCD Panel Inspection Criteria of supplier for the detail. - 3 - 1 2 - 4 4 2 1 Screw Size=M4x8; Torque:=9~10KGF.CM 1 3 Screw Size=M3x6; Torque:=9~10KGF.CM 3 FFC 1 - Power Board 1 - 1 1 P802 1 - Interfac e Board - Bracket Chassis Base -