Acer AOD270 Acer Aspire One D270 Service Guide - Page 105

Thermal Module Installation 0 + IMPORTANT: Apply approved thermal grease and ensure all heat pads are in position before replacing module. ! CAUTION: Use caution when applying thermal grease. Thermal grease may cause damage to the mainboard. The following thermal grease types are approved for use: Silmore GP50 Honeywell Jet Motor 7762 The following thermal pads are approved for use: Eapus XR-PE 1. Remove all traces of thermal grease from CPU using a lint-free cloth or cotton swab and Isopropyl Alcohol, Acetone, or other approved cleaning agent. 2. Apply small amount of thermal grease to center of CPU. NOTE: NOTE: Force used during installation of thermal module is sufficient to spread grease evenly over CPU top. 3. Place the thermal module on the mainboard. Refre to Figure 3-26. 4. Install and secure two (2) screws (C) to the mainboard in numerical order from one (1) to two (2). Refer to Figure 3-25. 5. Connect thermal module cable (A) to mainboard connector (B). Refer to Figure 3-25. 6. Install mainboard. ID Size C M2.0*3.0 NI Quantity 2 Screw Type Machine Maintenance Procedures 3-27