Acer Altos G310 MK2 User Manual - Page 52

To remove a Processor, twist the heat sink again. Do not force the heat sink from

Get Acer Altos G310 MK2 PDF manuals and user guides View all Acer Altos G310 MK2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

40 4 Configuring the system To remove a Processor 1 Observe the safety and ESD precautions at the beginning of this section. 2 Turn off all peripheral devices connected to the server. Turn off the server. 3 Remove the AC power cord from the server. 4 Remove the server's cover. See the documentation that accompanied your server chassis for instructions on removing the server's cover. 5 Unplug the processor fan cable from the server board. 6 Loosen the four captive screws on the corners of the heat sink. 7 Twist the heat sink slightly to break the seal between the heat sink and the processor. 8 Lift the heat sink from the processor. If it does not pull up easily, twist the heat sink again. Do not force the heat sink from the processor. Doing so could damage the processor. 9 Lift the processor lever. 10 Remove the processor. If installing a replacement processor, see "To install the Processor" on page 36. Otherwise, reinstall the chassis cover.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
4 Configuring the system
40
To remove a Processor
1
Observe the safety and ESD precautions at the beginning of this
section.
2
Turn off all peripheral devices connected to the server.
Turn off
the server.
3
Remove the AC power cord from the server.
4
Remove the server's cover. See the documentation that
accompanied your server chassis for instructions on removing the
server's cover.
5
Unplug the processor fan cable from the server board.
6
Loosen the four captive screws on the corners of the heat sink.
7
Twist the heat sink slightly to break the seal between the heat sink
and the processor.
8
Lift the heat sink from the processor. If it does not pull up easily,
twist the heat sink again. Do not force the heat sink from the
processor. Doing so could damage the processor.
9
Lift the processor lever.
10
Remove the processor.
If installing a replacement processor, see "To install the Processor" on
page 36
.
Otherwise, reinstall the chassis cover.