Acer Altos R360 F3 Installation & Configuration Guide - Page 50
CTRL-I, Advanced, PCI Configuration, UEFI Option, ROM Control, Intel RSTe SATA Controller
View all Acer Altos R360 F3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Altos R360 F3 Installation Configuration Guide Entering Intel onboard SATA RSTe RAID BIOS Utility (Legacy Mode) Please press CTRL-I when you see the RAID BIOS during POST. Entering Intel onboard SATA RSTe RAID BIOS Utility (EFI Mode) Please press F2 to enter BIOS Setup during POST. In BIOS Setup, select Advanced > PCI Configuration > UEFI Option ROM Control > Intel RSTe SATA Controller to configure Intel onboard SATA RSTe RAID in EFI mode. Loading Factory Default Setting NOTE. The Intel onboard SATA RSTe RAID BIOS utility does not provide the function to load factory default setting. Creating a RAID Volume 1. Select Create RAID Volume. 2. The CREATE VOLUME MENU displayed. 3. Type in the name of RAID volume. 4. Select RAID level. 5. Select desired HDD to create the RAID. 6. Select Strip Size. 7. Select Capacity. 8. Select Create Volume. 9. Press Y when "Are you sure you want to create the volume? (Y/N):" displayed. 10. Now the RAID volume is created, you can press ESC and select Exit to exit. Initializing a RAID Volume The RAID volume will be automatically initialized once it has been created. Assigning a Hot Spare Drive The Intel onboard SAS/SATA RSTe RAID BIOS utility does not provide the function to create hot spare drive. NOTE. Please create the hot spare drive with the Intel onboard SATA RSTe RAID utility in operating system. 43