Acer Altos R360 F3 Installation & Configuration Guide - Page 51

Altos R360 F3 Installation Configuration Guide APPENDIX B: INTEL ONBOARD SATA ESRTII RAID CONFIGURATION Enabling Intel Onboard SATA ESRTII RAID 1. Please press F2 to enter BIOS Setup during POST. 2. Please press F9 to load default BIOS settings. 3. In Main Page, change Quiet Boot from Enabled to Disabled. Quiet Boot [Disabled] 4. In Advanced Page, select Mass Storage Controller Configuration 5. Please select the SATA port that is connecting to the HDD desired. SATA Port 0-5 sSATA Port 0-3 6. You might see below information: AHCI Capable SATA Controller [AHCI] 7. Please change the setting of AHCI Capable SATA Controller from AHCI to RAID Mode. AHCI Capable SATA Controller [RAID Mode] 8. Keep the setting of AHCI Capable RAID Options as INTEL(R) ESRT2 (LSI*). AHCI Capable RAID Options 9. Save the setting and exit from BIOS Setup [INTEL(R) ESRT2 (LSI*)] Entering Intel onboard SATA ESRTII RAID BIOS Utility Please press CTRL-E when you see the RAID BIOS during POST. Loading Factory Default Setting 1. Select Objects from Management menu. 2. Select Adapter. The selectable adapter will be listed. 3. Press Enter to select the adapter and the adapter setting will be shown on the screen. 4. Select Factory Default. 5. Select Yes to load the default settings. 6. Press ESC Exit the RAID BIOS Utility 7. Press Ctrl + Alt + Del to reboot the server. Creating a RAID Volume 1. Select Configure from Management Menu. 44