Acer Aspire 5510 Aspire 5510 Service Guide - Page 47
General Information, Before You Begin - disassembly
View all Acer Aspire 5510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
General Information Before You Begin Before proceeding with the disassembly procedure, make sure that you do the following: 1. Turn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cables from the system. 3. Remove the battery pack. NOTE: The screws used to secure bottom case and upper case are more than one type. Please group same type of screw together as you disassemble the system for service purpose. The image below is for your reference. Please pay attention to the explanation below. The screws that secure heatsink cover, MIni PCI cover and HDD cover are with the covers. There is no need to worry about mix them up. Screw Type M2.5*6 M2.5*6 M2.5*6 M2.5*3 Location Bottom case and IO bezel 12 (hightlight with yellow circle) Remove the HDD cover then 1 you will see. Remove the Mini PCI cover 3 then you will see. Remove the battery then you 1 will see. Quantity 41 Chapter 3