Home » Acer Manuals » Laptops » Acer Aspire 5510 » Manual Viewer

Acer Aspire 5510 Aspire 5510 Service Guide - Page 53

Removing the LCD Module, Remove the screw that fastens the ODD module. - notebook

Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

6. Use a flat-bladed screwdriver to release the CPU lock. 7. Remove the CPU from the socket carefully. Removing the LCD Module 1. Remove the three screws holding the middle cover. 2. Open the LCD module as the picture shown then detach the middle cover from the main unit. . 3. Remove the two screws that secure the keyboard as shown. 4. Turn over the keyboard as shown and disconnect the keyboard cable then remove the keyboard. 5. Pull out the antenna set with a tweezers then take out the antenna set from the main unit. . 6. Remove the screw that fastens the ODD module. 7. Turn over the notebook computer then detach the ODD module carefully. NOTE: When you reattach the ODD, please make sure you attach the ODD module completely to the main unit. Otherwise, you can not fasten the screw and the screw may damage the main board. 47 Chapter 3

Section	Page
Cover	1
Revision History	2
Copyright	3
Conventions	4
Preface	5
T.O.C	6
System Specifications	7
Features	7
Block Diagram	9
Outlook View	10
Open View	10
Front View	11
Left View	12
Right View	13
Rear View	14
Bottom View	15
Indicators	16
Launch Keys	17
Using the Keyboard	18
Lock keys	18
Hot Keys	19
Special Keys	19
Windows Keys	20
Ejecting the optical (CD or DVD) drive tray	22
Using a computer security lock	23
Audio	24
Adjusting the Volume	24
Touchpad	25
Touchpad Basics	25
Hardware Specifications and Configurations	27
System Utilities	35
BIOS Setup Utility	35
Information	36
Main	38
Advanced	40
Security	41
Set Supervisor/User Password	42
Characters 0-9,A-Z (not case sensitive)	42
Boot	44
Exit	45
Machine Disassembly and Replacement	46
General Information	47
Before You Begin	47
Disassembly Procedure Flowchart	48
Removing the Battery Pack	50
Removing the HDD Module/the Memory and the Wireless LAN Card/the Thermal Module and the CPU/ODD M...	51
Removing the HDD Module	51
Removing the Memory and the Wireless LAN Card	51
Removing the Thermal Module and CPU	52
Removing the LCD Module	53
Disassembling the Main Unit	55
Separate the Main Unit Into the Upper and the Lower Case Assembly	55
Disassembling the Upper Case Assembly	56
Disassembling the Lower Case Assembly	57
Disassembling the LCD Module	59
Disassembling the External Modules	61
Disassembling the Optical Drive Module	61
Troubleshooting	62
System Check Procedures	63
External Diskette Drive Check	63
External CD-ROM Drive Check	63
Keyboard or Auxiliary Input Device Check	63
Memory check	64
Power System Check	64
Touchpad Check	66
Power-On Self-Test (POST) Error Message	67
Index of Error Messages	68
POST Code	71
Index of Symptom-to-FRU Error Message	72
Intermittent Problems	75
Undetermined Problems	76
Use NAPP CD to Build Master Hard Disc Drive	77
CD to Disk Recovery	77
Disk to Disk Recovery	80
Jumper and Connector Locations	84
Top View	84
Rear View	85
RTC Jumper	87
FRU (Field Replaceable Unit) List	88
Exploded Diagram	89

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.