Acer Aspire V3-471 Acer Aspire V3-471 Notebook Service Guide - Page 126

Jet Motor 7762 The following thermal pads are approved for use: Eapus XR-PE 1. Remove all traces of thermal grease from CPU using a lint-free cloth or cotton swab and Isopropyl Alcohol, Acetone, or other approved cleaning agent. 2. Apply small amount of thermal grease to center of CPU. NOTE: NOTE: Force used during installation of thermal module is sufficient to spread grease evenly over CPU top. 3. Place the thermal module on the mainboard. Refer to Figure 3-30. 4. Tighten five (5) captive screws (A) in numerical order from one (1) to five (5) to mainboard (Figure 3-30). Ensure the thermal module is properly aligned and seated. 5. Connect the thermal fan cable to mainboard connector (B) (Figure 3-30). 6. Install Mainboard. 3-32 Machine Maintenance Procedures