Acer Aspire Z1100 Acer Aspire Z1100 Desktop Service Guide - Page 86

Converter Board Removal 0 Prerequisite: Back cover Removal 1. Locate converter board (A) on middle frame. (Figure 3-10) A B C F D E C Figure 3-10. Converter Board 2. Disconnect the following cables: Converter cable (B) from converter board connector (D) Change board FFC (E) from converter board connector (F) 3. Remove screws (C) from middle frame. 4. Remove converter board. Converter Board Installation 0 1. Install converter board (A) to middle frame. (Figure 3-10) 2. Install and secure screws (C) to middle frame. 3. Connect the following cable: Converter cable (B) to converter board connector (D) Change board FFC (E) to converter board connector (F) 4. Install back cover. ID Size C M3.0x5.0 Quantity 2 Screw Type 3-16 Machine Maintenance Procedures