Acer Aspire Z3801 Acer Aspire Z3801 Desktop Service Guide - Page 93

Converter Board Removal 0 Prerequisite: Rear Cover Removal 1. Locate converter board (A) on front cover. (Figure 3-22) A D B F C E D Figure 3-22. Inverter Board 2. Disconnect the following cables: Converter to mainboard cable (B) from converter board connector (C) Converter to panel cable (F) from converter board connector (E) 3. Remove screws (D) from front cover. 4. Remove converter board. Converter Board Installation 0 1. Install converter board (A) to front cover. (Figure 3-22) 2. Install and secure screws (D) to front cover. 3. Connect the following cable: Converter to panel cable (F) to converter board connector (E) Converter to mainboard cable (B) to inverter board connector (C) 4. Install rear cover. ID Size D M3.0x4.0 Quantity 2 Screw Type Machine Maintenance Procedures 3-23