Acer Extensa 500 User Guide - Page 51
Installing and Removing the Battery Pack, Operating on Battery Power
View all Acer Extensa 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Battery Pack 3. Disconnect the adapter to use up the battery before recharging again. You only need to do this once or twice with a new battery or with a battery that's been stored without being used for a long time. If the computer is to be stored for more than two weeks, we suggest you remove the battery pack. Battery power from a fully charged battery pack depletes in roughly a day with the computer in Standby mode, a month in Hibernation mode or when power is off. Warning! Do not expose battery packs to temperatures below 0ºC (32ºF) or above 60ºC (140ºF). This may adversely affect the battery pack. Installing and Removing the Battery Pack Important! Before removing the battery pack, make sure that you have an AC adapter connected to the computer; otherwise turn off the computer. To install a battery pack, slide it into the battery compartment, then latch the battery compartment cover. Reverse the steps to remove the battery pack. Chapter 2 Operating on Battery Power 31