Acer H6535i User Manual - Page 40
Appendices, Troubleshooting
View all Acer H6535i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
English 30 Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. # Problem Solution 1 Start-up problems • If no lights turn on: • Be sure that the power cord is securely connected to the projector and the other end is plugged into an outlet with power. • Press the power button again. • Unplug the power cord and wait for a short while, then plug it in and press the power button again. 2 Image problems • If the searching source is displayed: • Press SOURCE to select an active input source. • Be sure the external source is turned on and connected. • For a computer connection, ensure your notebook computer's external video port is turned on. Refer to the computer manual. • If the image is out of focus: • While displaying the on-screen menu, adjust the focus ring. (The image size should not change; if it does, you are adjusting the zoom, not the focus.) • Check the projection lens to see if it needs cleaning. • If the image is flickering or unstable for a computer connection: • Press RESYNC. 3 Remote control problems • If the remote control does not operate: • Be sure nothing is blocking the remote control receiver on the front of the projector. • Use the remote control within the effective range. • Aim the remote control at the screen or at the front of the projector. • Move the remote control so it is more directly in front of or behind the projector and not as far to the side.