Acer H6535i User Manual - Page 42
Replacing the Lamp
View all Acer H6535i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
English 32 Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. Make sure the projector has been cooling down for at least 45 minutes before changing the lamp. Warning: The lamp compartment is hot! Allow it to cool down before changing the lamp. To Change the Lamp Turn off the projector by pressing the Power button. Allow the projector at least 45 minutes to cool down. Disconnect the power cord. 1 Remove the screw (a) and slide the lamp cover (b) for removal. (b) 2 Disconnect the lamp connector (c). 3 Remove the screw (d) that secure the lamp module. (a) Pull out the lamp module (e) by the handle (f). To replace the lamp module, use a new lamp and reverse the above steps. (d) (f) (c) (e) Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.