Acer P5207B User Manual - Page 34
Auto Screen, VGA OUT, Standby, Reset, Security, Timeout Min.
View all Acer P5207B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
English 24 Auto Screen VGA OUT (Standby) Reset The up/down move of your electronic screen relates to power on/off of the projector. Selecting "On" enables the function. The projector can output a VGA signal when it is in standby mode and the VGA IN (or VGA IN 1) and VGA OUT sockets are correctly connected to the devices. Enabling this function slightly increases the standby power consumption. Press after choosing "Yes" to return the display parameters on all menus to the factory default settings. Security This projector provides a useful security function for the administrator to manage the projector. Press to change the "Security" setting. If the security function is enabled, your must enter "Administrator Password" first before changing the security setting. Security The factory default of "Administrator Password" is "1234". • Select "On" to enable the security function. You have to enter password depending on the "Security Mode". Please refer to "User Password" section for details. • If "Off" is selected, you can switch on the projector without password. Timeout (Min.) Once "Security" is set to "On", you can set timeout function. • Press to select timeout duration. • The range is from 10 to 990 minutes. • When time is up, the projector will request you to enter the password again. • The factory default setting of "Timeout (Min.)" is "Off". • Once the security function is enabled, the projector will request you to enter password when switching on the projector. Both "User Password" and "Administrator Password" can be accepted for this dialogue.